| General |
| Model | Two-piece, with brush bar |
| Material | Module plate: sheet steel, brush strip: plastic, UL 94-HB, halogen-free |
| Surface protection | Module sheet: galvanised |
| Scope of delivery | 2 module sheet halves including brush bar, high-density, including fastening material |
| Mounting note | Combining multiple floor plate modules is necessary to fully close the floor in VX IT; the floor plate module can be combined with other floor modules with a depth of 237.5 mm |
| Note | Base plate modules with brush strip not suitable for applications with degree of protection according to IEC 60 529 |
| Depth | 237,5 mm |
| Suitable for | Enclosure type: VX IT, Width: = 600 mm |
| PCF/VE (Cradle-to-Gate) | 5.9 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5301334 is a two-piece floor plate module with brush strip, specifically designed for enclosures of type VX IT with a width of 600 mm. It enables targeted cable entry from below into the enclosure and provides high-density sealing against environmental conditions. The two-part design allows installation even when cables are already installed in the enclosure, enabling retrofitting without dismantling existing wiring. The module consists of sheet steel, galvanized, and a brush strip made of halogen-free plastic, complying with the UL 94-HB standard. The brush strip features alternately offset bristles to ensure improved sealing during proper cable entry and to support climate control within the enclosure.
Applications
This floor plate module is intended for use in VX IT enclosures with a width of 600 mm. It is used to seal the enclosure floor, requiring multiple modules to be combined to cover the entire floor area. The module depth is 237.5 mm, making it compatible with other floor modules of the same depth. However, it is not suitable for applications requiring a protection rating according to IEC 60 529, as the brush strip does not provide sufficient protection against dust or water.
Functions and Equipment in Detail
The module consists of two separate sheet metal halves, each containing a brush strip. The brush strips are designed to ensure high air-tightness when cables are properly inserted. The galvanized surface of the sheet steel provides corrosion protection. The delivery includes both module sheet metal halves with brush strips and the required mounting hardware. Installation is performed by securing the halves to the designated mounting points on the enclosure floor.
Technology Explained Simply
The brush strip provides a mechanical seal between the enclosure floor and the inserted cables. The alternately offset bristles increase sealing effectiveness by providing a larger contact surface with the cable outer surface. This controls air circulation within the enclosure, supporting the performance of climate control systems. The galvanized sheet steel surface protects the module against corrosion, especially in environments with high humidity. The materials comply with UL 94-HB standards and are halogen-free, enhancing fire safety.
Compatibility and Accessories
The module is specifically designed for VX IT enclosures with a width of 600 mm. It can be combined with other floor modules with a depth of 237.5 mm to cover the entire floor area. Combining multiple modules is necessary to achieve complete sealing. It is not suitable for protection ratings according to IEC 60 529, as the brush strip does not offer sufficient protection against dust or water.
Installation and Mounting
Installation is performed by securing the two module sheet metal halves to the designated mounting points on the enclosure floor. The mounting hardware is included in the delivery. The two-part design allows installation even with existing cables, as the halves can be mounted individually. Cables are routed through the brush strips, and proper cable insertion is critical for ensuring sealing effectiveness.
Operational Advantages
The high-density sealing provided by the brush strip supports climate control in the enclosure by preventing unwanted air circulation. The galvanized surface offers corrosion protection, increasing the module’s service life. The two-part design enables flexible installation, even in existing installations. The use of halogen-free materials and UL 94-HB certification enhances the system’s fire safety. The module size of 600 mm width and 237.5 mm depth ensures optimal fit for VX IT enclosures of this width.