Rittal 5301333, EAN: 4028177950856

Rittal 5301333 VX IT floor plate module 800x237.5 mm single-piece

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 5301333 VX IT floor plate module 800x237.5 mm single-piece

Lieske Part No. 1714662
Mfg Part No 5301333
EAN-Code 4028177950856
Manufacturer Rittal
Here only 27,60 EUR
32,84 EUR incl. VAT

Further information for Rittal 5301333 VX IT floor plate module 800x237.5 mm single-piece

General
ModelSingle-piece, with brush strip
MaterialModule sheet: steel sheet, brush bar: plastic, UL 94-HB, halogen-free, module sheet: steel sheet, brush bar: plastic, UL 94-HB, halogen-free
Surface protectionModule sheet: galvanised
Scope of deliveryIncluding mounting hardware
Mounting noteCombining multiple floor plate modules is necessary to fully close the floor in VX IT; the floor plate module can be combined with other floor modules with a depth of 237.5 mm
NoteBase plate modules with brush strip not suitable for applications with degree of protection according to IEC 60 529
Depth237,5 mm
Suitable forEnclosure type: VX IT, width: = 800 mm
PCF/VE (Cradle-to-Gate)7.7 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5301333 is a floor plate module for use in the VX IT enclosure, specifically designed for enclosure widths of 800 mm. It is intended for targeted cable entry from below and is supplied as a single-piece module made of sheet steel. The surface of the module plate is galvanized, providing a corrosion-resistant protective layer. A plastic brush strip is integrated at the bottom, made from halogen-free material and meeting the UL 94-HB flame retardant rating. This brush strip enables flexible and dust-tight cable guidance through the floor plate, although the brushes themselves are not suitable for applications requiring protection ratings according to IEC 60 529.

Applications
This floor plate module is used in industrial environments where organized and secure cable entry from below into enclosures is required. It is specifically designed for the VX IT enclosure type, commonly used in electrical and IT technology for mounting devices and components. The module size of 600 mm width and 237.5 mm depth matches the standard dimensions of the VX IT enclosure. The brush strip allows flexible cable routing without completely sealing the enclosure base, which is advantageous for certain installations.

Functions and Equipment in Detail
The module consists of sheet steel, galvanized to prevent corrosion. The plastic brush strip ensures dust-tight and flexible cable routing. The brush strip is not designed for protection ratings according to IEC 60 529, meaning it is not suitable for applications with high protection requirements (e.g., IP54 or higher). The module is single-piece and supplied with fastening material required for mounting in the enclosure.

Technology Explained Simply
The galvanization of the sheet steel protects the module from corrosion and extends its service life. The brush strip made of halogen-free plastic (UL 94-HB) provides safe and flame-retardant cable routing. The brushes themselves are not suitable for IP protection ratings, as they do not provide a tight seal. The depth of 237.5 mm corresponds to the standard depth for VX IT enclosures, enabling precise fitting. Combining multiple modules is necessary to fully close the floor area of the enclosure.

Compatibility and Accessories
The floor plate module is specifically designed for the VX IT enclosure with a width of 800 mm. It can be combined with other floor modules with a depth of 237.5 mm to enable modular and adaptable floor sealing. Installation is carried out using the included fastening material, ensuring secure fixation in the enclosure.

Installation and Mounting
Mounting is done by securing the module to the lower enclosure side. It is necessary to combine multiple modules to fully seal the floor area of the VX IT enclosure. Fastening is done using the included mounting material. The brush strip allows flexible cable routing, with cables passing through the brushes without completely sealing the enclosure base.

Operational Advantages
The module provides organized and secure cable entry from below, structuring and clarifying cable routing within the enclosure. The galvanized surface ensures high corrosion resistance, increasing the module’s service life. The brush strip made of halogen-free plastic offers safe and flame-retardant cable routing. The modular design allows flexible adaptation to different enclosure configurations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1714662
qrcode für Rittal 5301333 VX IT floor plate module 800x237.5 mm single-piece