| General |
| Model | Single-piece, with brush strip |
| Material | Module plate: sheet steel, brush strip: plastic, UL 94-HB, halogen-free |
| Surface protection | Module sheet: galvanised |
| Scope of delivery | Including mounting hardware |
| Mounting note | Combining multiple floor plate modules is necessary to fully close the floor in VX IT; the floor plate module can be combined with other floor modules with a depth of 237.5 mm |
| Note | Base plate modules with brush strip not suitable for applications with degree of protection according to IEC 60 529 |
| Depth | 237,5 mm |
| Suitable for | Enclosure type: VX IT, Width: = 600 mm |
| PCF/VE (Cradle-to-Gate) | 5.1 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5301332 is a
floor plate module for use in the
VX IT enclosure system, specifically designed for enclosures with a width of 600 mm. The module enables targeted cable entry from below into the enclosure and allows for structured and clean cabling. It is a single-piece unit consisting of a
steel sheet module plate, galvanized, and a
brush strip made of plastic, which is halogen-free and classified according to UL 94-HB. The brush strip ensures flexible yet tight cable guidance, preventing uncontrolled movement or contamination.
Applications
This floor plate module is intended for use in industrial enclosures of type VX IT, particularly in installations where organized and secure cable entry from below is required. It is not suitable for applications requiring a protection rating according to IEC 60 529, as the brush strip does not provide sufficient mechanical or weather-resistant sealing. Therefore, the modules are suitable for open or partially enclosed installations where simple cable routing is sufficient.
Functions and Equipment in Detail
The module has a depth of 237.5 mm and fits exactly into the standard module height of the VX IT system. The brush strip is permanently integrated and enables flexible yet controlled cable guidance. The galvanized steel sheet provides high mechanical stability and corrosion protection. The delivery includes the module and the
fastening material required for mounting in the enclosure base. Installation is carried out by securing the module to the designated mounting points in the enclosure base.
Technology Explained Simply
The brush strip made of halogen-free plastic (UL 94-HB) is designed for guiding cables entering the enclosure from below. The brushes prevent cables from slipping through the opening while remaining flexible enough to compensate for cable movements. The galvanized steel sheet offers high strength and is protected against corrosion, extending the module’s service life. The module size of 600 mm width and 237.5 mm depth is standardized and fits into the modular structure of the VX IT system.
Compatibility and Accessories
The floor plate module is specifically designed for enclosures of type VX IT with a width of 600 mm. It can be combined with other floor modules of the same depth (237.5 mm) for modular adaptation to different enclosure configurations. Combining multiple modules is necessary to fully cover the enclosure base. It is not compatible with modules designed for other widths or depths.
Installation and Mounting
Installation is performed by securing the module to the designated mounting points in the enclosure base. The included fastening material enables secure and stable anchoring. The modules must be arranged in a row to cover the entire base area.
Operational Advantages
The module provides structured and clean cable entry, simplifying maintenance and inspection of the cabling. The brush strip ensures flexible yet secure cable guidance, reducing damage caused by friction or mechanical stress. The galvanized surface protects the module against corrosion, increasing its service life. The modular design allows for flexible adaptation to different enclosure configurations.