Rittal 5301330, EAN: 4028177950825

Rittal 5301330 VX IT base plate module ventilated

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 5301330 VX IT base plate module ventilated

Lieske Part No. 1989418
Mfg Part No 5301330
EAN-Code 4028177950825
Manufacturer Rittal
Here only 35,88 EUR
42,70 EUR incl. VAT

Further information for Rittal 5301330 VX IT base plate module ventilated

General
Materialsteel sheet
Surface protectionZinc-plated
Scope of deliveryfloor plate modules, ventilated, filter mat, including mounting hardware
Mounting noteCombining multiple floor plate modules is necessary to fully close the floor in VX IT; the floor plate module can be combined with other floor modules with a depth of 237.5 mm
Depth237,5 mm
Suitable forEnclosure type: VX IT, Width: = 600 mm
PCF/VE (Cradle-to-Gate)6.2 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5301330 is a floor plate module, specifically designed for use in the VX IT enclosure with a width of 600 mm. It serves to fully seal the enclosure base and supports passive ventilation of the internal components. The module is made of sheet steel and is zinc-coated, ensuring high corrosion resistance and long service life in industrial environments. Dimensions are 600 mm in width and 237.5 mm in depth, fitting precisely into the designated mounting areas of the VX IT enclosure.

Applications

The floor plate module is designed for use in industrial enclosures, particularly in the field of IT and electrical engineering. It is used to seal the lower section of the enclosure, preventing unwanted ingress of dust, moisture, or small particles. At the same time, the large perforated area enables efficient passive enclosure ventilation, supporting cooling of components installed within the enclosure. Its use is especially beneficial in environments with high requirements for cleanliness and thermal stability.

Functions and Equipment in Detail

The module is ventilated, with the large perforated area promoting air circulation within the enclosure. The integrated filter mat can be easily inserted and replaced from the top, simplifying maintenance and cleaning of the enclosure. The filter mat is designed to capture dust and particles that may enter through the ventilation openings. The delivery includes the floor plate module, the filter mat, and the mounting hardware required for installation.

Technology Explained Simply

The module is made of sheet steel, protected against corrosion by zinc coating. The zinc coating increases the module’s service life, especially in damp or aggressive environments. The depth of 237.5 mm is matched to the standard depth of VX IT enclosures, ensuring secure and precise fit. The ventilation openings are sized to allow sufficient air circulation without compromising the mechanical stability of the module. The filter mat is easily accessible and can be replaced without tools, enhancing maintenance convenience.

Compatibility and Accessories

The floor plate module is specifically designed for the enclosure type VX IT with a width of 600 mm. It can be used in combination with additional floor plate modules of the same depth (237.5 mm) to cover the entire base area of the enclosure. Combining multiple modules is necessary to achieve full sealing. As an accessory, a filter mat for floor plate, single-piece, ventilated is available, which is inserted directly into the module and supports air purification.

Installation and Mounting

Installation is carried out using the mounting hardware included in the delivery. Modules must be combined in the required quantity to fully cover the base area of the VX IT enclosure. Mounting is done at the designated mounting points of the enclosure. The filter mat is inserted from the top into the designated guides, allowing easy replacement without tools. Due to standardized dimensions and clear instructions included in the delivery, installation is simple and quick.

Operational Advantages

The floor plate module provides reliable sealing of the enclosure base, reducing entry points for dust and moisture. The integrated ventilation supports passive cooling of devices installed in the enclosure, enhancing operational reliability. The easy replaceability of the filter mat reduces maintenance effort and allows for quick cleaning. The zinc coating of the sheet steel ensures high corrosion resistance, extending the module’s service life in industrial applications. The modular design enables flexible adaptation to different enclosure sizes within the VX IT series.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1989418
qrcode für Rittal 5301330 VX IT base plate module ventilated