| General |
| Model | Connection cable for LED through-wiring |
| Length | 3.000 mm |
| Suitable for part no. | 4140.810, 4140.820, 4140.830, 4140.840 |
The Rittal connection cable SZ 4315850 is a cable specifically designed for through-wiring for LED system lights of the compact series. With a length of 3,000 mm, it enables the electrical connection between multiple lights in a row, thus achieving continuous lighting in enclosures or industrial installations. The design as an LED connection cable for through-wiring is tailored to the requirements of industrial lighting systems, where safe and reliable power supply over longer distances is necessary.
Connection cable serves here as an electrical bridge between individual lights, with power supply via the cable. The length of
3,000 mm provides sufficient clearance for installation in larger enclosures or when arranging multiple lights in a line. The connection is made directly to the connection points of the system lights, ensuring a compact and orderly wiring.
System light LED Compact is the target component for this connection cable. The cable is specifically designed for part numbers 4140.810, 4140.820, 4140.830, and 4140.840, which represent different versions of the LED compact lights. These lights are widely used in industrial environments where uniform, energy-efficient, and low-maintenance lighting is required.
Through-wiring is the central function of this cable. It allows electrical power to be transmitted from one light to the next, enabling the entire lighting row to be powered from a single connection point. This reduces the number of required cable connections and simplifies installation and maintenance. The cable is designed for use in enclosures and other enclosed technical units, where clean and structured cabling is important.
The connection cable is designed as
connection accessory for LED compact system lights. It is directly connected to the connection sockets of the lights and serves exclusively for power transmission. The connection is made via standardized plug connections intended for the specified light models. The cable is not suitable for other lighting systems or applications, as it is specifically adapted to the electrical and mechanical requirements of Rittal LED compact lights.
The
length of 3,000 mm is sufficient for most industrial applications to connect multiple lights in a row. The connection is made via the designated connection points of the lights, ensuring a stable and secure connection. The cable is intended for use exclusively in enclosed technical units such as enclosures.
The connection cable is available in a packaging unit of 1 piece. The net weight is 0.112 kg, the gross weight 0.126 kg. The connection is made via the standardized connection sockets of the system lights, enabling simple and quick installation.
The connection cable is exclusively intended for the specified part numbers (4140.810, 4140.820, 4140.830, 4140.840). Use with other lights or systems is not intended and not recommended, as the electrical and mechanical requirements do not match. The cable serves exclusively for power transmission between the lights and is not a replacement for the primary power supply of the lights.
Installation is performed by directly connecting to the connection sockets of the LED compact lights. No additional tools or mounting aids are required, as the connection is made via plug connections. The cable is designed for simple and quick installation, with connection security ensured by the specific fit. The cable is intended for use exclusively in enclosed technical units, where orderly cabling is required.
The connection cable enables efficient and structured lighting in industrial installations. Through-wiring reduces the number of required connection points, simplifying installation and easing maintenance. The cable is designed for use in enclosures and similar units, where reliable and safe power supply for lighting is required. The connection is made via the standardized connection sockets of the system lights, ensuring a compatible and stable connection.
LED system light is the central component for which this connection cable was developed. The cable serves as an electrical bridge between multiple lights, enabling continuous lighting in a row. The connection is made via the designated connection points, ensuring safe and reliable power supply. The cable is not suitable for other applications or lighting systems.
Connection accessory describes the function of this cable as a supplementary component for LED compact system lights. It serves exclusively for power transmission between the lights and is not part of the primary power supply. The connection is made via standardized plug connections intended for the specified light models.
Through-wiring is the central function realized by this cable. It enables electrical power to be transmitted from one light to the next, allowing the entire lighting row to be powered from a single connection point. This reduces the number of required cable connections and simplifies installation and maintenance. The cable is designed for use in enclosures and other enclosed technical units, where clean and structured cabling is important.
System light LED Compact is the target component for this connection cable. The cable is specifically designed for part numbers 4140.810, 4140.820, 4140.830, and 4140.840, which represent different versions of the LED compact lights. These lights are widely used in industrial environments where uniform, energy-efficient, and low-maintenance lighting is required.
Connection cable serves here as an electrical bridge between individual lights, with power supply via the cable. The length of
3,000 mm provides sufficient clearance for installation in larger enclosures or when arranging multiple lights in a line. The connection is made directly to the connection points of the system lights, ensuring a compact and orderly wiring.
The connection cable is designed as
connection accessory for LED compact system lights. It is directly connected to the connection sockets of the lights and serves exclusively for power transmission. The connection is made via standardized plug connections intended for the specified light models. The cable is not suitable for other lighting systems or applications, as it is specifically adapted to the electrical and mechanical requirements of Rittal LED compact lights.
The
length of 3,000 mm is sufficient for most industrial applications to connect multiple lights in a row. The connection is made via the designated connection points of the lights, ensuring a stable and secure connection. The cable is intended for use exclusively in enclosed technical units such as enclosures.
The connection cable is available in a packaging unit of 1 piece. The net weight is 0.112 kg, the gross weight 0.126 kg. The connection is made via the standardized connection sockets of the system lights, enabling simple and quick installation.
The connection cable is exclusively intended for the specified part numbers (4140.810, 4140.820, 4140.830, 4140.840). Use with other lights or systems is not intended and not recommended, as the electrical and mechanical requirements do not match. The cable serves exclusively for power transmission between the lights and is not a replacement for the primary power supply of the lights.
Installation is performed by directly connecting to the connection sockets of the LED compact lights. No additional tools or mounting aids are required, as the connection is made via plug connections. The cable is designed for simple and quick installation, with connection security ensured by the specific fit. The cable is intended for use exclusively in enclosed technical units, where orderly cabling is required.
The connection cable enables efficient and structured lighting in industrial installations. Through-wiring reduces the number of required connection points, simplifying installation and easing maintenance. The cable is designed for use in enclosures and similar units, where reliable and safe power supply for lighting is required. The connection is made via the standardized connection sockets of the system lights, ensuring a compatible and stable connection.