| General |
| Model | Wall surface mounted |
| Market-relevant product changes | The cover for the connection box to protect the electrical connection on the cooling unit is no longer included in the scope of delivery from the beginning of 2024. The covers 3355.200 and 3355.210 can be ordered optionally as accessories. |
| Material | Stainless steel 1.4301 (AISI 304) |
| Colour | RAL 9007 |
| Scope of delivery | Condensate trap with hydrophobic RiNano coating, Integrated electric condensate evaporation, Including mounting material, Pre-wired for connection (pluggable terminal block) |
| Options | For remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages. |
| Total cooling capacity according to DIN EN 14511 | Cooling capacity L35 L35/50 Hz: 4 kW, cooling capacity L35 L35/60 Hz: 4 kW, cooling capacity L35 L50/50 Hz: 2.8 kW, cooling capacity L35 L50/60 Hz: 2.8 kW |
| Rated operating voltage | 380 V - 480 V, 3~, 50 Hz/60 Hz |
| Note | By downloading the software, a contract is established between the contracting party and Rittal for the free use of the software according to these license terms. Only suitable for semi-outdoor use (see instruction manual). For protection of Blue e+ cooling units, appropriate surge protection must be provided: - Operating voltage < 460 V (3~): Uc 275 V, Imax 40 kA, In 20 kA, Up 1.5 kV. - Operating voltage > 460 V (3~): Uc 385 V, Imax 40 kA, In 20 kA, Up 1.5 kV. |
| Note on part number | Tolerance: 380 V -10 % (342 V) and 480 V +6 % (509 V), full installation not possible |
| Rated power | 1,45 kW |
| Air performance (free blowing) | External circuit: 2,300 m³/h, Internal circuit: 2,300 m³/h |
| Energy efficiency ratio (EER) 50/60 Hz L35 L35 | Cooling capacity factor L35 L35 (EER) 50 Hz: 3.08, Cooling capacity factor L35 L35 (EER) 60 Hz: 3.08 |
| Seasonal energy efficiency ratio (SEER) 50/60 Hz | 6,4 |
| Width | 450 mm |
| Height | 1.600 mm |
| Depth | 393 mm |
| Required mounting cutout | Cutout width: 433 mm, cutout height: 1,579 mm |
| Degree of protection IP according to EN 60 529 | Internal circuit IP 55 |
| NEMA degree of protection | UL Type 12, UL Type 3R |
| Refrigerant/cooling medium | Refrigerant: R-1234yf, Quantity: 1.76 kg, Quantity compression system: 1.04 kg, Quantity heat pipe system: 0.72 kg, Global Warming Potential (GWP): 0.5, CO₂ equivalent (CO₂e): 0 t |
| Temperature control | e+ Controller (factory setting +35 °C) |
| Operating temperature range | -20 °C...60 °C |
| Storage temperature range | -40 °C...70 °C |
| Operating temperature range refrigerant circuit (active) | 3 °C...60 °C |
| Operating temperature range heat pipe | -20 °C...45 °C |
| Adjustment range | 20 °C...50 °C |
| Rated power Pel | Rated power L35 L35/50 Hz: 1.3 kW, rated power L35 L35/60 Hz: 1.3 kW, rated power L35 L50/50 Hz: 1.25 kW, rated power L35 L50/60 Hz: 1.25 kW |
| Permissible operating pressure (p max.) | 24 bar |
| PCF/VE (Cradle-to-Gate) | 422.34 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SK 3488.640 is a wall-mounted cooling unit of the Blue e+ series, specifically designed for climate control of enclosures in semi-outdoor environments. The unit features a total cooling capacity of 4.0 kW at an operating voltage of 380 V to 480 V, 3~, 50 Hz/60 Hz, and is made of stainless steel 1.4301 (AISI 304), ensuring high corrosion resistance and durability. The color is RAL 9007, a dark gray standard tone that integrates well in industrial environments. Dimensions are 450 mm width, 1,600 mm height, and 393 mm depth, requiring a mounting cutout of 433 mm width and 1,579 mm height. The cooling unit is not suitable for full enclosure installation and must only be used in semi-outdoor environments as described in the manual.
Applications
This cooling unit is designed for use in industrial environments, particularly in enclosures installed in semi-external areas where some weather exposure is expected. The IP 55 protection rating for the internal circuit and NEMA approvals UL Type 12 and UL Type 3R ensure high protection against dust and splashing water, enabling use in humid or dusty environments. Operating temperature ranges are between -20 °C and 60 °C, with the refrigerant circuit operating actively from 3 °C to 60 °C and the Heat Pipe system from -20 °C to 45 °C. Storage is possible in the range of -40 °C to 70 °C.
Functions and Equipment in Detail
The unit is equipped with an e+ controller, factory-set to a temperature of +35 °C. The adjustable range is between 20 °C and 50 °C, allowing flexible adaptation to different operating conditions. The integrated electrical condensate evaporation ensures that condensate is evaporated directly within the unit, eliminating the need for an external drain. The condenser is coated with a hydrophobic RiNano coating, which reduces water absorption and increases efficiency. The unit is pre-wired for connection and features a plug-in terminal strip, simplifying installation. Mounting materials are included in the delivery scope.
Technology Explained Simply
The cooling unit uses refrigerant R-1234yf, which has a very low Global Warming Potential (GWP) of 0.5, minimizing environmental impact. The total refrigerant charge is 1.76 kg, with 1.04 kg in the compression system and 0.72 kg in the Heat Pipe system. The Heat Pipe technology and variable-speed components provide an average energy saving of 75 % compared to conventional systems. The air performance is 2,300 m³/h for both the external and internal circuits, ensuring efficient air circulation within the enclosure. Energy efficiency is characterized by a Coefficient of Performance (EER) of 3.08 at 50 Hz and 60 Hz, and a Seasonal Energy Efficiency Ratio (SEER) of 6.4. The rated power is 1.45 kW, with the nominal power varying between 1.25 kW and 1.3 kW depending on operating conditions.
Compatibility and Accessories
For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages, increasing machine availability and process safety. As accessories, among others, covers for the connection box (article numbers 3355.200 and 3355.210), temperature sensors for Blue e+ cooling units, as well as filter mats and metal filters for various SK models are available.
Mounting and Installation
Mounting is done on the wall, requiring a mounting cutout of 433 mm width and 1,579 mm height. The unit is not suitable for full enclosure installation. Mounting materials are included in the delivery scope, and the unit is pre-wired for connection, accelerating installation. An appropriate surge protection device must be provided: for operating voltages below 460 V (3~), a surge protection device with Uc 275 V, Imax 40 kA, In 20 kA, and Up 1.5 kV is required; for voltages above 460 V (3~), Uc 385 V, Imax 40 kA, In 20 kA, and Up 1.5 kV apply.
Operational Advantages
The variable-speed components and Heat Pipe technology ensure gentle component cooling, extending the lifespan of components within the enclosure and the cooling unit itself. High energy efficiency reduces energy consumption and operating costs. The integrated condensate evaporation eliminates the need for an external drain, simplifying installation. The remote monitoring capability via the IoT Interface enables proactive maintenance and increases operational safety.