| General |
| Model | Roof structure |
| Material | steel sheet |
| Colour | RAL 7035 |
| Scope of delivery | Roof-mounted cooling unit Blue e+, pleated filter, pre-wired, including mounting material, condensate hose (3 m) |
| Options | For remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages. |
| Total cooling capacity according to DIN EN 14511 | Cooling capacity L35 L35/50 Hz: 1.3 kW, cooling capacity L35 L35/60 Hz: 1.3 kW, cooling capacity L35 L50/50 Hz: 0.6 kW, cooling capacity L35 L50/60 Hz: 0.6 kW |
| Rated operating voltage | 110 V - 240 V, 1~, 50 Hz/60 Hz, 380 V - 480 V, 3~, 50 Hz/60 Hz |
| Note | Installation only possible on control cabinets with minimum dimensions (W x D) 800 x 600 mm; operation without a pleated filter is not permitted; by downloading the software, a contract is established between the partner and Rittal for the free use of the software according to these license terms. |
| Rated power | 0,75 kW |
| Air performance (free blowing) | External circuit: 750 m³/h, internal circuit: 700 m³/h |
| Energy efficiency ratio (EER) 50/60 Hz L35 L35 | Cooling performance factor L35 L35 (EER) 50 Hz: 1.94, Cooling performance factor L35 L35 (EER) 60 Hz: 1.94 |
| Seasonal energy efficiency ratio (SEER) 50/60 Hz | 4,6 |
| Width | 700 mm |
| Height | 308 mm |
| Depth | 560 mm |
| Degree of protection IP according to EN 60 529 | External circuit IP 54 with pleated filter, internal circuit IP 54 with pleated filter |
| Refrigerant/cooling medium | Refrigerant: R-1234yf, quantity: 0.56 kg, quantity compression system: 0.37 kg, quantity heat pipe system: 0.19 kg, Global Warming Potential (GWP): 0.5, CO₂ equivalent (CO₂e): 0 t |
| Electrical connection type | Plug-in terminal block |
| Temperature control | e+ Controller (factory setting +35 °C) |
| Operating temperature range | -20 °C...55 °C |
| Storage temperature range | -40 °C...70 °C |
| Operating temperature range refrigerant circuit (active) | 3 °C...55 °C |
| Operating temperature range heat pipe | -20 °C...45 °C |
| Adjustment range | 20 °C...50 °C |
| Rated power Pel | Rated power L35 L35/50 Hz: 0.67 kW, rated power L35 L35/60 Hz: 0.67 kW, rated power L35 L50/50 Hz: 0.57 kW, rated power L35 L50/60 Hz: 0.57 kW |
| Permissible operating pressure (p max.) | 24 bar |
| PCF/VE (Cradle-to-Gate) | 181.79 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SK 3485.730 is a roof-mounted cooling unit of the Blue e+ series, specifically designed for the climate control of enclosures. It serves to regulate temperature within the interior of enclosures, ensuring the operational reliability of electronic and electrical components. The unit is mounted on the enclosure roof and features a total cooling capacity of 1.3 kW at an operating temperature of +35 °C, with cooling capacity varying depending on operating conditions. Cooling is achieved via a hybrid system combining variable-speed components and Heat Pipe technology, resulting in an average energy saving of 75 %. The operating voltage covers multiple voltage ranges: 110 V to 240 V, 1~, 50/60 Hz, as well as 380 V to 480 V, 3~, 50/60 Hz, enabling worldwide application. The unit is made of sheet steel and painted in RAL 7035. Dimensions are 700 mm (width) × 308 mm (height) × 560 mm (depth). Installation is only possible on enclosures with a minimum size of 800 mm (width) × 600 mm (depth).
Applications
This cooling unit is intended for use in industrial environments where enclosures are subject to high thermal loads. It is particularly suitable for systems operating continuously and requiring a constant internal temperature within the enclosure. The combination of variable-speed components and Heat Pipe technology ensures gentle component cooling, extending the service life of components installed in the enclosure. The IP 54 protection rating for both external and internal circuits (with pleated filter) makes the unit suitable for use in environments with dust and splashing water exposure. Operation without a pleated filter is not permitted.
Functions and Equipment in Detail
The unit features an e+ controller, factory-set to a temperature of +35 °C. The temperature control adjustment range is between 20 °C and 50 °C. Airflow performance is 750 m³/h for the external circuit and 700 m³/h for the internal circuit. Energy efficiency is characterised by a coefficient of performance (EER) of 1.94 (at 50 Hz and 60 Hz) and a seasonal energy efficiency ratio (SEER) of 4.6. Rated power is 0.75 kW, with actual electrical power varying between 0.57 kW and 0.67 kW depending on operating conditions. The unit is equipped with a plug-in terminal strip, enabling simple and secure electrical connection. The operating temperature range is between -20 °C and +55 °C, with the refrigerant circuit activating at a minimum temperature of 3 °C. The Heat Pipe technology operates within the range of -20 °C to +45 °C.
Technology Explained Simply
The hybrid technology of the cooling unit combines a variable-speed compressor unit with Heat Pipe technology. The variable-speed components adjust their performance according to current cooling demand, leading to more efficient energy use. The Heat Pipe technology removes heat from the enclosure and dissipates it externally, reducing the load on the compressor. Refrigerant R-1234yf is used, which has a Global Warming Potential (GWP) of 0.5, indicating very low greenhouse gas impact. The total refrigerant charge is 0.56 kg, with 0.37 kg in the compression system and 0.19 kg in the Heat Pipe system. CO₂ equivalents (CO₂e) amount to 0 t, indicating minimal environmental impact.
Compatibility and Accessories
The cooling unit is equipped with a pleated filter, required for IP 54 protection rating. Additionally, a condensate hose (3 m) is included in the delivery scope. For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used, enabling monitoring of device data, statuses, and system messages. Compatible accessories include roof plates for roof-mounted cooling units, SK temperature sensors, electric condensate evaporation, door position switches, and lifting eyes for VX, TS, SE enclosures.
Installation and Mounting
Mounting is performed on the enclosure roof. The enclosure must have minimum dimensions of 800 mm (width) × 600 mm (depth). The unit is pre-wired and supplied with mounting materials. Electrical connection is made via a plug-in terminal strip. Installation requires no additional tools or components, as the unit is already equipped with all necessary elements for mounting.
Operational Advantages
The combination of variable-speed components and Heat Pipe technology leads to significant energy savings and extended service life of components installed in the enclosure. Multi-voltage capability enables worldwide use without modifying the power supply. Intuitive operation via the e+ controller and the option for remote monitoring enhance operational reliability and system availability. The IP 54 protection rating ensures reliable performance in industrial environments with dust and splashing water exposure. The use of refrigerant R-1234yf with a GWP of 0.5 contributes to environmental compatibility.