Rittal 3479801, EAN: 4069196016734

Rittal 3479801 SK 3479.801 wall-mounted cooling unit 500 W blue

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3479801 SK 3479.801 wall-mounted cooling unit 500 W blue

Lieske Part No. 2034226
Mfg Part No 3479801
EAN-Code 4069196016734
Manufacturer Rittal
Here only 1.411,05 EUR
1.679,15 EUR incl. VAT

Further information for Rittal 3479801 SK 3479.801 wall-mounted cooling unit 500 W blue

General
ModelWall surface mounted
Materialsteel sheet
Basic colourRAL 7035
ColourHousing: RAL 7035, louver grille: RAL 7012
Scope of deliveryCondenser with hydrophobic RiNano coating, including mounting material, pre-wired for connection (pluggable terminal block)
OptionsFor remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages.
Total cooling capacity according to DIN EN 14511Cooling capacity L35 L35/50 Hz: 0.5 kW, cooling capacity L35 L35/60 Hz: 0.5 kW, cooling capacity L35 L50/50 Hz: 0.23 kW, cooling capacity L35 L50/60 Hz: 0.23 kW
Rated operating voltage110 V - 240 V, 1~, 50 Hz/60 Hz
NotePlease note the mounting instructions., By downloading the software, a contract is established between the contracting party and Rittal regarding the free use of the software according to these license terms., Only suitable for semi-outdoor use (see instruction manual for description)
Note on part numberTolerance: 110 V -10 % (99 V) and 240 V +10 % (264 V)
Rated power0,36 kW
Air performance (free blowing)External circuit: 366.6 m³/h, internal circuit: 366.6 m³/h
Energy efficiency ratio (EER) 50/60 Hz L35 L35Cooling performance ratio L35 L35 (EER) 50 Hz: 2, Cooling performance ratio L35 L35 (EER) 60 Hz: 2
Width300 mm
Height570 mm
Depth199 mm
Required mounting cutoutCutout width: 280 mm, cutout height: 550 mm
Degree of protection IP according to EN 60 529Internal circuit IP 55
NEMA degree of protectionUL Type 1, UL Type 12
Refrigerant/cooling mediumRefrigerant: R-1234yf, Quantity: 0.17 kg, Quantity compression system: 0.1 kg, Quantity heat pipe system: 0.07 kg, Global Warming Potential (GWP): 0.5, CO₂ equivalent (CO₂e): 0 t
Temperature controle+ Controller (factory setting +35 °C)
Operating temperature range-20 °C...60 °C
Storage temperature range-40 °C...70 °C
Operating temperature range refrigerant circuit (active)3 °C...60 °C
Operating temperature range heat pipe-20 °C...45 °C
Adjustment range20 °C...50 °C
Rated power PelRated power L35 L35/50 Hz: 0.25 kW, Rated power L35 L35/60 Hz: 0.25 kW, Rated power L35 L50/50 Hz: 0.29 kW, Rated power L35 L50/60 Hz: 0.29 kW
Permissible operating pressure (p max.)32 bar
PCF/VE (Cradle-to-Gate)81.32 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal SK 3479.801 is a wall-mounted cooling unit of the Blue e+ S series, designed for climate control of enclosures in semi-outdoor environments. The unit features a total cooling capacity of 0.5 kW at an operating temperature of +35 °C and a voltage of 110 V to 240 V, 1~, 50 Hz/60 Hz. It is made of sheet steel and available in the base colour RAL 7035, with the louver grille finished in RAL 7012. Dimensions are 300 mm (width) × 570 mm (height) × 199 mm (depth), requiring a mounting cutout of 280 mm (width) × 550 mm (height). The cooling unit is designed for use in environments with an operating temperature range of -20 °C to 60 °C and can withstand storage temperatures from -40 °C to 70 °C.

Applications
This cooling unit is intended for use in enclosures in semi-outdoor environments where controlled temperature regulation is required. It is suitable for industrial applications where reliable cooling of electronic components and controls is necessary. Global usability is enabled by multi-voltage capability and country-specific approvals.

Functions and Equipment in Detail
The unit is equipped with an e+ controller, factory-set to +35 °C, offering an adjustable range from 20 °C to 50 °C. The air flow rate is 366.6 m³/h for both the external and internal circuits. The condenser is coated with a hydrophobic RiNano finish, enhancing serviceability. The cooling unit is pre-wired and includes a plug-in terminal strip. Mounting materials are included in the delivery scope.

Technology Explained Simply
The cooling unit uses refrigerant R-1234yf, which has a low Global Warming Potential (GWP) of 0.5, making it environmentally friendly. The total refrigerant charge is 0.17 kg, with 0.1 kg in the compression system and 0.07 kg in the heat pipe system. Energy efficiency is ensured by a coefficient of performance (EER) of 2 at 50 Hz and 60 Hz under L35 L35 conditions. The rated power is 0.36 kW, with nominal power varying between 0.25 kW and 0.29 kW depending on operating conditions. The maximum allowable operating pressure is 32 bar.

Compatibility and Accessories
For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages to increase machine availability and process safety. Compatible accessories include, among others, an SK temperature sensor, a door position switch, a universal condensate collection bottle, an SK condensate hose, as well as metal filters and filter mats for cooling units.

Mounting and Installation
Installation is carried out on the wall of the enclosure. The required mounting cutout measures 280 mm in width and 550 mm in height. Installation is simplified by the pre-connected plug-in terminal strip and the included mounting materials. Mounting instructions are included in the delivery scope.

Operational Advantages
The cooling unit offers high energy efficiency, resulting in an average energy saving of 75 % and reducing the CO₂ footprint. Intelligent temperature control and remote monitoring capabilities enhance operational safety. The use of R-1234yf as refrigerant contributes to climate-neutral production. The robust construction from sheet steel, along with IP 55 protection for the internal circuit and UL Type 1 and UL Type 12 compliance per NEMA, ensures reliable performance in industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2034226
qrcode für Rittal 3479801 SK 3479.801 wall-mounted cooling unit 500 W blue