Rittal 3478801, EAN: 4069196016710

Rittal 3478801 SK 3478.801 wall-mounted cooling unit 300 W blue

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3478801 SK 3478.801 wall-mounted cooling unit 300 W blue

Lieske Part No. 2034224
Mfg Part No 3478801
EAN-Code 4069196016710
Manufacturer Rittal
Here only 999,35 EUR
1.189,23 EUR incl. VAT

Further information for Rittal 3478801 SK 3478.801 wall-mounted cooling unit 300 W blue

General
ModelWall surface mounted
Materialsteel sheet
Basic colourRAL 7035
ColourHousing: RAL 7035, louver grille: RAL 7012
Scope of deliveryCondenser with hydrophobic RiNano coating, including mounting material, pre-wired for connection (pluggable terminal block)
OptionsFor remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages.
Total cooling capacity according to DIN EN 14511Cooling capacity L35 L35/50 Hz: 0.3 kW, cooling capacity L35 L35/60 Hz: 0.3 kW, cooling capacity L35 L50/50 Hz: 0.14 kW, cooling capacity L35 L50/60 Hz: 0.14 kW
Rated operating voltage110 V - 240 V, 1~, 50 Hz/60 Hz
NotePlease note the mounting instructions., By downloading the software, a contract is established between the contracting party and Rittal regarding the free use of the software according to these license terms., Only suitable for semi-outdoor use (see instruction manual for description)
Note on part numberTolerance: 110 V -10 % (99 V) and 240 V +10 % (264 V)
Rated power0,22 kW
Air performance (free blowing)External circuit: 366.6 m³/h, internal circuit: 366.6 m³/h
Energy efficiency ratio (EER) 50/60 Hz L35 L35Cooling capacity factor L35 L35 (EER) 50 Hz: 2.01, Cooling capacity factor L35 L35 (EER) 60 Hz: 2.01
Width300 mm
Height570 mm
Depth159 mm
Required mounting cutoutCutout width: 280 mm, cutout height: 550 mm
Degree of protection IP according to EN 60 529Internal circuit IP 55
NEMA degree of protectionUL Type 1, UL Type 12
Refrigerant/cooling mediumRefrigerant: R-1234yf, Quantity: 0.135 kg, Quantity compression system: 0.08 kg, Quantity heat pipe system: 0.055 kg, Global Warming Potential (GWP): 0.5, CO₂ equivalent (CO₂e): 0 t
Temperature controle+ Controller (factory setting +35 °C)
Operating temperature range-20 °C...60 °C
Storage temperature range-40 °C...70 °C
Operating temperature range refrigerant circuit (active)3 °C...60 °C
Operating temperature range heat pipe-20 °C...45 °C
Adjustment range20 °C...50 °C
Rated power PelRated power L35 L35/50 Hz: 0.15 kW, rated power L35 L35/60 Hz: 0.15 kW, rated power L35 L50/50 Hz: 0.17 kW, rated power L35 L50/60 Hz: 0.17 kW
Permissible operating pressure (p max.)32 bar
PCF/VE (Cradle-to-Gate)77.7 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
Rittal SK 3478.801 is a wall-mounted cooling unit of the Blue e+ S series, designed for climate control of enclosures in semi-outdoor environments. The unit features a total cooling capacity of 0.3 kW at an operating temperature of 35 °C (L35) and a frequency of 50 Hz or 60 Hz. It is designed for a rated operating voltage of 110 V to 240 V, 1~, 50 Hz/60 Hz, with voltage tolerance at 110 V -10 % (99 V) and 240 V +10 % (264 V). The cooling capacity is 0.14 kW at an ambient temperature of 50 °C (L50), enabling use in various environmental conditions. The unit is made of sheet steel and has a base colour of RAL 7035; the louver grille is in RAL 7012. Dimensions are 300 mm (width) × 570 mm (height) × 159 mm (depth), requiring a mounting cutout of 280 mm (width) × 550 mm (height).

Applications
This cooling unit is designed for use in enclosures, particularly in environments classified as semi-outdoor. It is suitable for applications requiring continuous cooling of electronic components to ensure operational reliability and extend device lifespan. Operating temperature ranges are between -20 °C and 60 °C, with the refrigerant circuit operating actively from 3 °C to 60 °C and the heat pipe system from -20 °C to 45 °C. Storage temperature ranges extend from -40 °C to 70 °C.

Functions and Equipment in Detail
The unit is equipped with an e+ controller, factory-set to a temperature of +35 °C. The temperature control adjustment range is between 20 °C and 50 °C. Air performance is 366.6 m³/h for both the external and internal circuits. The cooling unit includes a condenser with a hydrophobic RiNano coating to minimise condensation formation. The delivery includes mounting materials and a plug-in connection terminal strip, enabling ready-to-connect wiring.

Technology Explained Simply
The cooling unit uses refrigerant R-1234yf, which has a low Global Warming Potential (GWP) of 0.5, making it environmentally friendly. The total refrigerant quantity is 0.135 kg, with 0.08 kg in the compression system and 0.055 kg in the heat pipe system. Energy efficiency is described by the Energy Efficiency Ratio (EER) of 2.01 at 50 Hz and 60 Hz (L35 L35), indicating high efficiency. Rated power is 0.22 kW, with nominal power at 0.15 kW (L35 L35) and 0.17 kW (L35 L50). The permissible operating pressure is 32 bar.

Compatibility and Accessories
For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages to increase machine availability and process safety. Additional compatible accessories include a door position switch, a filter mat for cooling units, a universal condensate collection bottle (article number 3301600), a VX support roller (8618420), a metal filter for SK 3178.80x/3179.80x, an SK condensate hose (12 x 2 mm, length 10 m), and an SK temperature sensor for Blue e+ cooling units.

Mounting and Installation
The unit is designed for wall mounting and requires a mounting cutout of 280 mm (width) × 550 mm (height). Mounting is done using the included mounting materials. The plug-in connection terminal strip ensures ready-to-connect wiring, simplifying installation.

Operational Advantages
The cooling unit offers high energy efficiency with an EER value of 2.01, resulting in an average energy saving of 75 %. Global usability is enabled by multi-voltage capability and country-specific approvals. Remote monitoring via the IoT Interface enhances operational safety and enables proactive maintenance. The use of refrigerant R-1234yf with a GWP of 0.5 contributes to reducing the CO₂ footprint. The PCF values (Cradle-to-Gate) are 77.7 kg CO₂ eq (Category B), indicating environmentally conscious manufacturing. Protection rating IP 55 for the internal circuit and NEMA approvals UL Type 1 and UL Type 12 ensure reliable operation in various environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2034224
qrcode für Rittal 3478801 SK 3478.801 wall-mounted cooling unit 300 W blue