| General |
| Model | for filter fans/exhaust filters |
| Material | PET |
| Colour | White |
| Note | The performance data, degree of protection and approvals of the devices are only guaranteed in combination with original Rittal filter mats. |
| Suitable for part no. | 3238.xxx |
| Width | 114 mm |
| Height | 114 mm |
| Depth | 14 mm |
| Filter class | according to DIN EN 779: G4, according to DIN EN ISO 16890: ISO Coarse 70 % |
| Degree of protection IP according to IEC 60 529 | IP 54 when mounted in filter & roof fan/exhaust filter |
| Note on part number | Not suitable for use in EMC filter fans. |
The Rittal SK 3322720 is a
pleated filter for use in
filter fans and
outlet filters of the product series 3238.xxx. It is designed for air purification in enclosures and industrial equipment, removing dust and particles from the internal air to extend the service life of installed components. The filter is made of
PET material and is finished in
white color, with dimensions of 114 mm (width) × 114 mm (height) × 14 mm (depth). The filter class corresponds to
G4 according to DIN EN 779 as well as
ISO Coarse 70 % according to DIN EN ISO 16890, ensuring efficient separation of coarse particles. The protection rating
IP 54 is achieved when mounted in filter and roof fans or outlet filters, making it suitable for industrial environments with moderate dust and splashing water hazards.
Applications
This filter is specifically designed for use in Rittal filter fans and outlet filters of the 3238.xxx series. It is employed in enclosures, cooling units, and chillers where continuous air purification is required to maintain the functionality of electronic components. Applications include industrial plants where humidity and dust levels could compromise operational safety. The filter technology enables higher air flow performance compared to conventional non-woven filters, improving cooling efficiency and reducing energy consumption.
Functions and Equipment in Detail
The
pleated filter technology provides a significantly larger filter surface area compared to flat non-woven filters, resulting in better air purification and longer service life. The filter mats are made of
PET, a robust and chemical-resistant plastic suitable for industrial applications. The
white color is standard and supports visual inspection of contamination levels. The filter class
G4 corresponds to coarse particle separation, sufficient for use in enclosures to minimize contamination of internal components. The specification
ISO Coarse 70 % complements the classification and describes efficiency in separating particles in the 1 to 10 µm range.
Technology Explained Simply
The
pleated structure of the filter increases the effective filter surface area, reducing air resistance and increasing air flow volume. This leads to improved cooling performance in devices where the filter is installed. The
protection rating IP 54 means the filter is protected against dust and splashing water, making it suitable for indoor use in environments with moderate exposure. The note “IP 54 when mounted in filter & roof fan/outlet filter” refers to the overall protection rating of the system when the filter is correctly installed. The G4 filter class is designed for separating coarse particles such as dust, fibers, and large dirt, which is sufficient in industrial electrical engineering to extend device lifespan.
Compatibility and Accessories
The filter is exclusively intended for Rittal filter fans and outlet filters with product number 3238.xxx. Compatibility is limited to this series, and it is explicitly stated that the filter is
not suitable for EMC filter fans. The performance data, protection rating, and approvals of the devices are only guaranteed when used with original Rittal filter mats, meaning that using replacement filters from other manufacturers may affect warranty and technical specifications. The packaging unit is 5 pieces, which is practical for maintenance and replacement in industrial installations.
Installation and Mounting
Mounting is done into the designated filter holders of Rittal filter fans and outlet filters from the 3238.xxx series. Exact installation instructions can be found in the respective device manual for the fans. The filters are designed to be inserted into the holder without tools. Correct orientation is important to ensure optimal air flow and filter performance. Filters should be regularly inspected for contamination and replaced as needed to maintain cooling performance and air purification.
Operational Advantages
The
pleated filter technology reduces air resistance, resulting in higher air flow performance and improved cooling efficiency. Longer service life of the filters reduces maintenance frequency and lowers operating costs. Better air purification leads to less dust accumulation in enclosures, increasing the reliability of electronic components. Using original Rittal filter mats ensures compliance with technical specifications and device approvals.