| General |
| Material | Brass |
| Valve configuration | ½"-bypass valve |
| OUT_PRESSURE_ADJUSTMENT_RANGE | 2 - 12 bar |
The product SK 3301900 from Rittal is a
relief valve made of
brass, designed as a
safety device in the water circuit between a chiller and an air/water heat exchanger. It serves for pressure regulation and prevents unwanted increases in pump pressure in the chiller when the solenoid valve of the heat exchanger is closed outside the cooling cycle. This protects the system from overpressure loads and ensures safe operation of the climate control unit.
Applications
The valve is specifically used in industrial and technical climate control systems, particularly in combination with air/water heat exchangers integrated in enclosures or IT racks. It is part of the water circuit control system, ensuring that system pressure remains stable even when the cooling process is interrupted. The application typically occurs in systems where the chiller is connected to the heat exchanger via a separate circuit.
Functions and Equipment in Detail
The
relief valve is designed as a
½" bypass valve and enables bypassing of the closed solenoid valve in the heat exchanger. This prevents pressure build-up in the water circuit, which could otherwise be caused by the chiller pump. The
pressure adjustment range is between
2 and 12 bar, with a
preset of 3 bar. This setting is suitable for typical operation in industrial climate control systems and can be adjusted according to requirements.
Technology Explained Simply
The valve operates as a pressure-limiting device: when the pressure in the water circuit exceeds the set value, the valve opens automatically and diverts the excess pressure through a bypass. This keeps the system pressure within safe limits. The material
brass offers good corrosion resistance and mechanical strength, which is important for use in industrial environments. The design as a
½" bypass valve allows for easy integration into existing pipelines with the corresponding connection diameter.
Compatibility and Accessories
The valve is specifically designed for use in systems with air/water heat exchangers and chillers. It is used in combination with Rittal climate control units such as the LCP hybrid CW 3311.900, where it ensures pressure regulation in the water circuit. Compatibility is ensured when the connection size (½") and pressure range (2–12 bar) match the respective system. No special accessories are required, as the valve functions as an independent safety device.
Installation and Mounting
Installation takes place in the water circuit between the chiller and the air/water heat exchanger. The valve is connected to the pipeline, with the ½" connections directly screwed onto the existing pipes. The pressure range setting is adjusted via an adjustment mechanism on the valve, which can be calibrated to the desired value (within 2–12 bar) according to requirements. Mounting requires no special tools or additional components.
Operational Advantages
The
relief valve ensures stable pressure control in the water circuit and prevents damage to the chiller or heat exchanger due to overpressure. The
brass construction ensures long service life and high reliability. The
preset of 3 bar is sufficient for most applications, with adjustment possible according to system requirements. The valve is compact and easy to install, making it well-suited for integration into existing climate control systems.