| General |
| Material | ABS |
| Colour | RAL 9005 |
| Scope of delivery | exhaust filter, non-woven filter mat |
| Mounting cutout | Cutout width: 177 mm, cutout height: 177 mm |
| Suitable for part no. | SK 3239.1xx |
| Width | 204 mm |
| Height | 204 mm |
| Depth | 24 mm |
| NEMA degree of protection | Type 12 with felt filter/pleated filter, Type 3, Type 3R, Type 4, Type 4X with felt filter/pleated filter and spray hood |
| Degree of protection IP according to IEC 60 529 | IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood |
The SK 3239208 is an outlet filter from Rittal, specifically designed for convective ventilation of enclosures. It is mounted in the upper or lower section of the enclosure to enable controlled air exhaust, while simultaneously preventing ingress of dust and foreign objects. The device is made of ABS and is finished in RAL 9005, allowing for visual harmonization with other components of the enclosure. Dimensions are 204 mm (width) × 204 mm (height) × 24 mm (depth), with the mounting cutout requiring an opening of 177 mm (width) × 177 mm (height). The filter is intended for use with enclosure models having article number SK 3239.1xx.
Applications
The outlet filter serves passive ventilation of enclosures, where air circulates through natural convection. It is suitable for applications requiring continuous air exhaust without the need for additional fans or mechanical drives. Installation in the upper or lower section of the enclosure enables targeted temperature regulation and prevents heat accumulation. The filtering function protects electronic components from contamination by dust and particles.
Functions and Equipment in Detail
The product is supplied with an outlet filter and a nonwoven filter mat. The nonwoven filter mat acts as the primary protective layer against fine particles and dust. The combination of filter and nonwoven mat enables effective air purification while maintaining air permeability. The ABS material ensures high mechanical stability and resistance to environmental influences such as humidity and temperature fluctuations.
Technology Explained Simply
Protection class IP 54 is achieved when the filter is used with a nonwoven filter or pleated filter. When a pleated filter is combined with an absorber mat, the protection class can be increased to IP 55. The highest protection class, IP 56, is attainable when the filter is used with a nonwoven filter or pleated filter and a spray water hood. These IP ratings comply with the requirements of IEC 60 529 and ensure high protection against dust and splashing water. NEMA protection types Type 3, Type 3R, Type 4, and Type 4X are also achievable, with Type 12 being reached using a nonwoven filter or pleated filter. The spray water hood increases resistance to water jets and is suitable for outdoor or humid environments.
Compatibility and Accessories
The outlet filter is specifically developed for enclosure models with article number SK 3239.1xx. As compatible accessories, the Blue e+ outlet filter in RAL 9005 is offered, which is technically compatible. Combining the filter with a spray water hood or absorber mat extends protection functions and enables use in more demanding environments.
Mounting and Installation
Installation is carried out by fitting into a pre-defined mounting cutout with dimensions 177 mm (width) × 177 mm (height). No additional tools or special mounting procedures are required. Positioning in the upper or lower section of the enclosure depends on ventilation requirements. The nonwoven filter mat is placed directly in the filter housing and can be replaced when soiled.
Operational Advantages
Using the outlet filter enables reliable and low-maintenance ventilation of enclosures. The integrated filtering function reduces contamination of internal components and extends the service life of electronic assemblies. The high protection class IP 56 and compatibility with NEMA Type 4X make the filter suitable for demanding industrial environments. Simple mounting and replacement of the nonwoven filter mat reduce maintenance effort and ensure continuous operation of the enclosure.