Rittal 3186630, EAN: 4028177934634

Rittal 3186630 SK 3186630 wall-mounted cooling unit 2000 W stainless steel

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3186630 SK 3186630 wall-mounted cooling unit 2000 W stainless steel

Lieske Part No. 1597973
Mfg Part No 3186630
EAN-Code 4028177934634
Manufacturer Rittal
Here only 3.934,15 EUR
4.681,64 EUR incl. VAT

Further information for Rittal 3186630 SK 3186630 wall-mounted cooling unit 2000 W stainless steel

General
ModelWall surface mounted
Market-relevant product changesThe cover for the connection box to protect the electrical connection on the cooling unit is no longer included in the scope of delivery from the beginning of 2024. The covers 3355.200 and 3355.210 can be ordered optionally as accessories.
MaterialStainless steel 1.4301 (AISI 304)
ColourRAL 9007
Scope of deliveryCondensate trap with hydrophobic RiNano coating, Integrated electric condensate evaporation, Including mounting material, Pre-wired for connection (pluggable terminal block)
OptionsFor remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages.
Total cooling capacity according to DIN EN 14511Cooling capacity L35 L35/50 Hz: 2 kW, Cooling capacity L35 L35/60 Hz: 2 kW, Cooling capacity L35 L50/50 Hz: 1.29 kW, Cooling capacity L35 L50/60 Hz: 1.29 kW
Rated operating voltage110 V - 240 V, 1~, 50 Hz/60 Hz, 380 V - 480 V, 3~, 50 Hz/60 Hz
NoteBy downloading the software, a contract is established between the contracting party and Rittal for the free use of the software according to these license terms. Only suitable for semi-outdoor use (see instruction manual). For protection of Blue e+ cooling units, appropriate surge protection must be provided: - Operating voltage < 460 V (3~): Uc 275 V, Imax 40 kA, In 20 kA, Up 1.5 kV. - Operating voltage > 460 V (3~): Uc 385 V, Imax 40 kA, In 20 kA, Up 1.5 kV.
Note on part numberTolerance: 110 V -10 % (99 V) and 240 V +10 % (264 V) / 380 V -10 % (342 V) and 480 V +6 % (509 V)
Rated power0,73 kW
Air performance (free blowing)External circuit: 1,250 m³/h, internal circuit: 1,250 m³/h
Energy efficiency ratio (EER) 50/60 Hz L35 L35Cooling performance factor L35 L35 (EER) 50 Hz: 3.23, Cooling performance factor L35 L35 (EER) 60 Hz: 3.23
Seasonal energy efficiency ratio (SEER) 50/60 Hz7,6
Width450 mm
Height1.600 mm
Depth294 mm
Required mounting cutoutCutout width: 433 mm, cutout height: 1,579 mm
Degree of protection IP according to EN 60 529Internal circuit IP 55
NEMA degree of protectionUL Type 12, UL Type 3R
Refrigerant/cooling mediumRefrigerant: R-513A, Quantity: 1.07 kg, Global Warming Potential (GWP): 631, CO₂ equivalent (CO₂e): 0.68 t
Temperature controle+ Controller (factory setting +35 °C)
Operating temperature range-20 °C...60 °C
Storage temperature range-40 °C...70 °C
Operating temperature range refrigerant circuit (active)3 °C...60 °C
Operating temperature range heat pipe-20 °C...45 °C
Adjustment range20 °C...50 °C
Rated power PelRated power L35 L35/50 Hz: 0.62 kW, rated power L35 L35/60 Hz: 0.62 kW, rated power L35 L50/50 Hz: 0.6 kW, rated power L35 L50/60 Hz: 0.6 kW
Permissible operating pressure (p max.)24 bar
PCF/VE (Cradle-to-Gate)952,2
The Rittal SK 3186630 is a wall-mounted cooling unit of the Blue e+ series, designed for climate control of enclosures in industrial applications. The unit features a total cooling capacity of 2 kW at an operating temperature of 35 °C (L35) and an operating voltage of 110 V to 240 V, 1~, 50/60 Hz, as well as 380 V to 480 V, 3~, 50/60 Hz. It is made of stainless steel 1.4301 (AISI 304) and is available in the colour RAL 9007. Dimensions are 450 mm (width) × 1,600 mm (height) × 294 mm (depth), requiring a mounting cutout of 433 mm (width) × 1,579 mm (height). The cooling unit is intended for use in semi-outdoor environments and features an integrated e+ controller pre-set at +35 °C at the factory. The temperature control range is between 20 °C and 50 °C.

Applications
This cooling unit is designed for use in industrial environments, particularly in enclosures requiring continuous cooling. It is suitable for applications where high operational reliability and long service life of electronic components within the enclosure are required. The multi-voltage capability enables worldwide use, regardless of local power supply conditions. Operating temperature ranges are between -20 °C and 60 °C, with the refrigerant circuit operating between 3 °C and 60 °C and the heat pipe operating between -20 °C and 45 °C.

Functions and Equipment in Detail
The unit features a condenser with hydrophobic RiNano coating, which minimizes condensation formation and simplifies maintenance. The integrated electric condensate evaporation ensures that condensate is evaporated directly within the unit, eliminating the need for an external drain. The cooling unit is pre-wired with a plug-in terminal strip and is delivered including mounting materials. The air flow rate is 1,250 m³/h in both the external and internal circuits. Energy efficiency is supported by speed-controlled components and heat pipe technology, resulting in an average energy saving of 75 %. The coefficient of performance (EER) is 3.23 at 50 Hz and 60 Hz, while the seasonal energy efficiency ratio (SEER) is 7.6.

Technology Explained Simply
The heat pipe technology ensures component-friendly cooling by efficiently removing heat from the enclosure without excessively stressing electronic components. The speed-controlled components adjust their performance according to current cooling demand, enhancing energy efficiency. Refrigerant R-513A is used, which has lower environmental impact (GWP: 631, CO₂ equivalent: 0.68 t). The IP 55 protection rating for the internal circuit and NEMA classification UL Type 12 as well as UL Type 3R ensure high protection against dust and splashing water, which is crucial for semi-outdoor use.

Compatibility and Accessories
For remote monitoring and networking of Blue e+ cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages to increase machine availability and process safety. Available accessories include, among others, covers for the connection box (article numbers 3355.200 and 3355.210), a condensate hose (12 x 2 mm, length 10 m), an air deflector for SK 3184, 3186, 3187.xxx, a temperature sensor for Blue e+ cooling units, and an air duct for Blue e+ wall-mounted cooling units.

Installation and Mounting
Mounting is done on the wall of the enclosure. The required mounting cutout is 433 mm in width and 1,579 mm in height. The unit is pre-wired, simplifying installation. Mounting materials are included in the delivery. For protection of the cooling units, appropriate surge protection must be provided: for operating voltages below 460 V (3~) with Uc 275 V, Imax 40 kA, In 20 kA, Up 1.5 kV, and for operating voltages above 460 V (3~) with Uc 385 V, Imax 40 kA, In 20 kA, Up 1.5 kV.

Operational Advantages
The cooling unit offers high energy efficiency due to speed-controlled components and heat pipe technology. The integrated condensate evaporation reduces maintenance effort, as no external drain is required. The multi-voltage capability enables worldwide use. The long service life of components in the enclosure and in the cooling unit is supported by component-friendly cooling. Intuitive operation via the e+ controller and the possibility of remote monitoring increase operational reliability and process availability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1597973
qrcode für Rittal 3186630 SK 3186630 wall-mounted cooling unit 2000 W stainless steel