Rittal 3181125, EAN: 4028177969100

Rittal 3181125 pleated filter IP55 for 3239.xxx

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3181125 pleated filter IP55 for 3239.xxx

Lieske Part No. 677445
Mfg Part No 3181125
EAN-Code 4028177969100
Manufacturer Rittal
Here only 46,41 EUR
55,23 EUR incl. VAT

Further information for Rittal 3181125 pleated filter IP55 for 3239.xxx

General
Modelfor filter fans/exhaust filters
MaterialFolding filter: base polyester, meltblown polycarbonate, absorber mat: 100 % polyester
ColourWhite
NoteThe performance data, degree of protection and approvals of the devices are only guaranteed in combination with original Rittal filter mats.
Suitable for part no.3239.3xx, 3239.7xx
Width167 mm
Height167 mm
Depth21 mm
Absorber mat dimensionswidth: 173 mm, height: 173 mm, depth: 2.9 mm
Degree of protection IP according to IEC 60 529IP 55 when mounted in filter fan/exhaust filter
Note on part numberNot suitable for use in EMC filter fans.
The Rittal SK 3181125 is a pleated filter for filter fans and outlet filters, specifically designed for use in devices with article numbers 3239.3xx and 3239.7xx. It serves air purification within enclosure climate control and ensures efficient dust separation to maintain internal hygiene in the enclosure and extend the service life of installed components. The filter mat is white in colour and consists of a pleated filter, with a base made of polyester and a meltblown layer made of polycarbonate. Additionally, an absorber mat made of 100 % polyester is integrated, enhancing the filtration performance. The filter dimensions are 167 mm width, 167 mm height, and 21 mm depth, while the absorber mat is slightly larger at 173 mm width, 173 mm height, and 2.9 mm depth.

Applications

The filter is intended for use in filter fans and outlet filters, particularly in combination with Rittal devices from series 3239.3xx and 3239.7xx. It is used in industrial installations where continuous air purification is required to ensure the functionality and reliability of electrical and electronic components within the enclosure. The filter technology is especially suitable for environments with increased dust or particle contamination, as it enables higher airflow performance compared to conventional nonwoven filters.

Functions and Equipment in Detail

The pleated filter technology offers a significant increase in airflow volume compared to conventional filters, resulting in improved cooling performance of the devices. At the same time, energy consumption is reduced due to more efficient airflow. The enhanced filtration properties ensure less dust enters the enclosure, increasing the cleanliness of internal components. The longer service life of the filter reduces maintenance frequency and thus lowers service costs. The absorber mat made of 100 % polyester supports filtration and contributes to the reduction of fine particles.

Technology Explained Simply

The filter consists of multiple layers: the base of the pleated filter is made of polyester, providing high mechanical stability and chemical resistance. The meltblown layer made of polycarbonate ensures fine particle separation. The integrated absorber mat made of polyester absorbs fine dust particles and prevents them from entering the enclosure. The protection rating IP 55 according to IEC 60 529 is achieved when mounted in a filter fan or outlet filter, meaning the filter is dust-tight and protected against splashing water. This makes it suitable for use in industrial environments where some humidity or splashing water may occur.

Compatibility and Accessories

The filter is specifically developed for Rittal filter fans and outlet filters with article numbers 3239.3xx and 3239.7xx. It is not suitable for use in EMC filter fans, as these have a different construction and filtration requirements. The performance data, protection rating, and approvals of the devices are only guaranteed when used with original Rittal filter mats. The packaging unit includes 5 pieces.

Installation and Mounting

Mounting is done directly into the designated filter fan or outlet filter of the specified article numbers. The filter mat is inserted into the device, with the exact mounting instructions following the respective device. The filter dimensions are matched to the standard sizes of Rittal devices, ensuring easy installation.

Operational Advantages

The pleated filter technology increases airflow, leading to improved cooling performance. Reduced dust contamination in the enclosure extends the service life of electronic components. The longer service life of the filter reduces maintenance frequency and lowers operating costs. The protection rating IP 55 ensures reliable operation in environments with dust and splashing water. Using original Rittal filter mats guarantees full performance data and approvals of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/677445
qrcode für Rittal 3181125 pleated filter IP55 for 3239.xxx