Rittal 3178801, EAN: 4028177962576

Rittal 3178801 SK 3178801 wall-mounted cooling unit 300 W without condensate

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3178801 SK 3178801 wall-mounted cooling unit 300 W without condensate

Lieske Part No. 1101760
Mfg Part No 3178801
EAN-Code 4028177962576
Manufacturer Rittal
Here only 1.030,06 EUR
1.225,77 EUR incl. VAT

Further information for Rittal 3178801 SK 3178801 wall-mounted cooling unit 300 W without condensate

General
ModelWall surface mounted
Materialsteel sheet
Basic colourRAL 7035
ColourHousing: RAL 7035, louver grille: RAL 7012
Scope of deliveryCondenser with hydrophobic RiNano coating, including mounting material, pre-wired for connection (pluggable terminal block)
OptionsFor remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages.
Total cooling capacity according to DIN EN 14511Cooling capacity L35 L35/50 Hz: 0.3 kW, cooling capacity L35 L35/60 Hz: 0.3 kW, cooling capacity L35 L50/50 Hz: 0.22 kW, cooling capacity L35 L50/60 Hz: 0.22 kW
Rated operating voltage110 V - 240 V, 1~, 50 Hz/60 Hz
NotePlease note the mounting instructions., By downloading the software, a contract is established between the contracting party and Rittal regarding the free use of the software according to these license terms., Only suitable for semi-outdoor use (see instruction manual for description)
Note on part numberTolerance: 110 V -10 % (99 V) and 240 V +10 % (264 V)
Rated power0,22 kW
Air performance (free blowing)External circuit: 366.6 m³/h, internal circuit: 366.6 m³/h
Energy efficiency ratio (EER) 50/60 Hz L35 L35Cooling capacity factor L35 L35 (EER) 50 Hz: 2.01, Cooling capacity factor L35 L35 (EER) 60 Hz: 2.01
Width300 mm
Height570 mm
Depth159 mm
Required mounting cutoutCutout width: 280 mm, cutout height: 550 mm
Degree of protection IP according to EN 60 529Internal circuit IP 55
NEMA degree of protectionUL Type 1, UL Type 12
Refrigerant/cooling mediumRefrigerant: R-513A, quantity: 0.13 kg, Global Warming Potential (GWP): 631, CO₂ equivalent (CO₂e): 0.08 t
Temperature controle+ Controller (factory setting +35 °C)
Operating temperature range-20 °C...60 °C
Storage temperature range-40 °C...70 °C
Operating temperature range refrigerant circuit (active)3 °C...60 °C
Operating temperature range heat pipe-20 °C...45 °C
Adjustment range20 °C...50 °C
Rated power PelRated power L35 L35/50 Hz: 0.15 kW, rated power L35 L35/60 Hz: 0.15 kW, rated power L35 L50/50 Hz: 0.18 kW, rated power L35 L50/60 Hz: 0.18 kW
Permissible operating pressure (p max.)32 bar
PCF/VE (Cradle-to-Gate)214,38
The Rittal SK 3178801 is a wall-mounted cooling unit of the Blue e+ S series, designed for climate control of enclosures and electronic devices in industrial applications. The unit features a cooling capacity of up to 0.3 kW at an operating voltage of 110 V to 240 V, 1~, 50 Hz/60 Hz, enabling worldwide use. It is made of sheet steel and available in the base colour RAL 7035, with the louver grille in RAL 7012. Dimensions are 300 mm (width) × 570 mm (height) × 159 mm (depth), requiring a mounting cutout of 280 mm (width) × 550 mm (height). The unit is intended for use in semi-outdoor environments.

Applications
This cooling unit is suitable for use in enclosures operating in industrial environments such as production halls, machine controls, or outdoor areas with limited weather exposure. It ensures a constant internal temperature within the enclosure to guarantee the function and lifespan of installed electronic components. Operating temperature ranges are between -20 °C and 60 °C, with the refrigerant circuit operating actively between 3 °C and 60 °C. Storage temperature ranges extend from -40 °C to 70 °C.

Functions and Equipment in Detail
The unit is equipped with an e+ controller, factory-set to a control temperature of +35 °C. The temperature control range is between 20 °C and 50 °C. Air performance is 366.6 m³/h for both external and internal circuits. Total cooling capacity according to DIN EN 14511 is 0.3 kW under L35 L35 conditions (50 Hz and 60 Hz); under L50 conditions, cooling capacity reduces to 0.22 kW. Rated power is 0.22 kW, with nominal power varying between 0.15 kW and 0.18 kW depending on operating conditions. Energy efficiency (EER) is 2.01 for both frequencies (50 Hz and 60 Hz) under L35 L35 conditions.

Technology Explained Simply
The cooling unit uses refrigerant R-513A, which has lower environmental impact. The quantity is 0.13 kg, with a Global Warming Potential (GWP) of 631 and CO₂ equivalent (CO₂e) of 0.08 t. The condenser is coated with a hydrophobic RiNano coating, reducing condensation formation and simplifying maintenance. The unit is pre-wired for connection and features a plug-in terminal strip, simplifying installation. The internal circuit protection rating is IP 55 according to EN 60 529, providing dust and splash water protection. The NEMA protection rating corresponds to UL Type 1 and UL Type 12, suitable for indoor use and lightly contaminated environments. The permissible operating pressure is 32 bar.

Compatibility and Accessories
For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages to increase machine availability and process safety. Compatible accessories include, among others, a universal condensate collection bottle, an SK condensate hose (12 x 2 mm, length 10 m), metal filters, filter mats, an SK temperature sensor, and support rollers for various enclosure types.

Mounting and Installation
The unit is designed for wall mounting and requires a mounting cutout of 280 mm (width) × 550 mm (height). It is delivered with mounting hardware and pre-wired for connection. Mounting instructions are included in the delivery scope. Installation is carried out in a semi-outdoor environment, with exact conditions specified in the instructions.

Operational Advantages
The cooling unit offers high energy efficiency with an average energy saving of 75 %, contributing to reduced CO₂ footprint. Multi-voltage capability enables use in various countries. Operation is convenient via the Rittal Scan & Service App. The hydrophobic RiNano coating on the condenser reduces condensation formation and decreases maintenance frequency. Integrated temperature control ensures stable internal temperature in the enclosure, increasing the reliability of installed devices.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1101760
qrcode für Rittal 3178801 SK 3178801 wall-mounted cooling unit 300 W without condensate