Rittal 3173120, EAN: 4028177969131

Rittal 3173120 pleated filter IP54

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3173120 pleated filter IP54

Lieske Part No. 2145329
Mfg Part No 3173120
EAN-Code 4028177969131
Manufacturer Rittal
Here only 59,69 EUR
71,03 EUR incl. VAT

Further information for Rittal 3173120 pleated filter IP54

General
Modelfor filter fans/exhaust filters
MaterialPET
ColourWhite
NoteThe performance data, degree of protection and approvals of the devices are only guaranteed in combination with original Rittal filter mats.
Suitable for part no.3243.xxx, 3244.xxx, 3245.xxx
Width280 mm
Height282 mm
Depth21 mm
Filter classaccording to DIN EN 779: G4, according to DIN EN ISO 16890: ISO Coarse 70 %
Degree of protection IP according to IEC 60 529IP 54 when mounted in filter & roof fan/exhaust filter
Degree of protectionDegree of protection in combination with filter fan/exhaust filter 3245.xxx is IP 51
Note on part numberNot suitable for use in EMC filter fans.
The Rittal SK 3173120 is a pleated filter for filter fans and outlet filters, specifically developed for use in industrial enclosures and climate control systems. The product is made of PET material and is finished in white colour. It is designed for use in combination with Rittal filter fans with article numbers 3243.xxx, 3244.xxx and 3245.xxx. The dimensions are 280 mm width, 282 mm height and 21 mm depth, ensuring a precise fit. The filter class corresponds to G4 according to DIN EN 779 as well as ISO Coarse 70 % according to DIN EN ISO 16890, enabling efficient separation of coarse particles and dust in the airflow.

Applications

The filter is intended for use in filter and roof fans, cooling units and chillers. It serves to clean the air within the enclosure, minimizing contamination of electronic components and extending the service life of the equipment. The application is in industrial environments where continuous air circulation and simultaneous particle separation are required. The filter technology is not suitable for EMC filter fans, as these require special electromagnetic shielding properties that are not provided by this filter.

Functions and Equipment in Detail

The pleated filter technology enables a significantly higher airflow compared to conventional nonwoven filters, increasing the performance of climate control units and reducing energy consumption. The structured pleated form increases the filter surface area and improves separation efficiency. As a result, the air within the enclosure is cleaned more effectively, leading to reduced dust loading on internal components. The longer service intervals between maintenance reduce operational service costs.

Technology Explained Simply

The filter is made of PET (polyethylene terephthalate), a robust and chemical-resistant plastic suitable for industrial applications. The white colour is standard and serves visual identification. The filter class G4 corresponds to coarse filtration, which is sufficient for use in enclosures to remove coarse particles such as dust and dirt. The ISO Coarse 70 % classification refers to particle separation in the range of 3–10 µm, which is sufficient for most industrial applications. The protection rating IP 54 is achieved when mounted in filter and roof fans, ensuring dust-tight and splash-proof conditions. In combination with filter fan 3245.xxx, the protection rating is IP 51, which is also dust-tight but only protected against vertically falling water spray.

Compatibility and Accessories

The filter is specifically designed for Rittal filter fans with article numbers 3243.xxx, 3244.xxx and 3245.xxx. Compatibility is limited to these series, as the dimensions and mounting geometries are precisely matched. The performance data, protection rating and approvals of the devices are only guaranteed when used with original Rittal filter mats.

Mounting and Installation

Installation is carried out directly into the designated filter holders of the specified filter fan models. The dimensions of 280 mm width, 282 mm height and 21 mm depth allow for easy and secure installation. No additional tools or mounting aids are required. Installation is performed by simply inserting the filter into the filter opening of the fan.

Operational Advantages

The pleated filter technology increases airflow, improving the cooling performance of the equipment. The longer service intervals between maintenance reduce operating costs. The dust reduction within the enclosure reduces the risk of short circuits and thermal overloads. The protection rating IP 54 (or IP 51 when combined with 3245.xxx) ensures reliable operation in industrial environments with increased dust and moisture exposure. The use of original Rittal filter mats is necessary to ensure full performance and protection ratings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2145329
qrcode für Rittal 3173120 pleated filter IP54