| General |
| Material | Glass-fibre-reinforced, thermoplastic polyester (PBT), flammability rating according to UL 94-V0 |
| Colour | RAL 7035 |
| Number of poles | 3-pole, 150 mm |
| Suitable for busbars | 60 x 10 mm, 80 x 10 mm, 100 x 10 mm |
| Rated current max. | 3.000 A |
| Width | 30 mm |
| Height | 420 mm |
| Depth | 170 mm |
The Rittal SV 3057000 is a
busbar holder for use in industrial power distribution systems. It is designed as a
3-pole holder with a
busbar centre spacing of 150 mm, and serves for the secure mounting of busbars in enclosures. The product is specifically designed for busbars with widths of 60 mm, 80 mm, or 100 mm and a height of 10 mm, with a maximum rated current up to
3,000 A. The construction enables stable installation in switchgear systems that must handle high electrical loads.
Applications
The busbar holder is used in industrial electrical installations, particularly in enclosures where secure and durable mounting of busbars is required. It is suitable for systems with high current ratings, such as those found in power distribution, manufacturing industry, or large-scale installations. Its use in systems with a rated current up to 3,000 A makes it a component for high-performance distribution systems. The
rated operating voltage is 1000 V~, 50/60 Hz, in accordance with VDE 0660, ensuring compatibility with standard low-voltage installations.
Features and Equipment in Detail
The holder is made of
glass-fibre-reinforced, thermoplastic polyester (PBT), a material offering high mechanical strength and thermal resistance. The flammability rating complies with
UL 94-V0, ensuring high flame retardancy. The colour is
RAL 7035, a standard grey tone that integrates well in industrial environments. Dimensions are
30 mm width, 420 mm height, and 170 mm depth, resulting in a compact yet robust design. The
continuous operating temperature is 140 °C, ensuring suitability for demanding environments.
Technology Explained Simply
The holder enables mounting of busbars with a centre spacing of 150 mm, which is important for standardisation in enclosures. Fixing is done via screws, with the specified
tightening torque for mounting screws being 8–10 Nm. The cover fastening requires a torque of
5–10 Nm. These values ensure a secure and vibration-resistant installation that remains stable even under mechanical stress during operation. The choice of PBT material ensures high electrical insulation properties and resistance to chemical influences.
Compatibility and Accessories
The SV 3057000 is compatible with busbars of dimensions
60 x 10 mm, 80 x 10 mm, and 100 x 10 mm. It is commonly used in combination with busbars such as
E-Cu 80x10 mm, 60x10 mm, or 100x10 mm, which are also available in the range. The use of spacing elements such as the
SV 3056000 may be required during installation of 60x10 mm busbars to maintain the specified centre spacing. The packaging unit includes
2 pcs, which is advantageous for mounting in symmetrical installations.
Installation and Mounting
Mounting is done by securing to the enclosure wall or within the enclosure frame. Screw fastening is carried out with the specified torques to ensure a secure connection. The positioning of holders is done according to the desired busbar centre spacing of 150 mm. Installation is part of enclosure assembly and requires knowledge in electrical installation.
Operational Advantages
The holder provides stable and secure mounting of busbars designed for high current ratings. The material quality and thermal resistance ensure long service life even under demanding operating conditions. Standardisation of the 150 mm centre spacing simplifies planning and installation in enclosures. Compatibility with various busbar widths increases flexibility in system design. The packaging unit of 2 pcs supports efficient installation in symmetrical systems.