| General |
| Model | 60-series profile |
| Material | Aluminium extruded profile with zinc die-cast corner pieces and single-pane safety glass. |
| Surface protection | Base frame: powder-coated RAL 7035, hinge and latch profile: anodized, natural |
| Disc advantage | made of single-pane safety glass: high resistance against solvents and scratches, antistatic, reduced risk of injury in case of breakage; standard double-barrel lock insert, replaceable with lock inserts 27 mm, type A and/or with Ergoform-S lock system (except H=270 mm); hinge with 180° opening angle, easy to hang |
| Frame advantage | Easily mountable on door due to adapted dimensions (door frame usable as drilling template)., Easily adjustable in height., Stabilises door cutout., Conceals cut edge., No dirt accumulates on seal, glass is secured against pulling out, no dirt falls when opening and no liquid runs behind window., Frame profile height 30 mm or 60 mm |
| Degree of protection IP according to EN 60 529 | IP 54 |
| Note | Standard double-barrel lock insert, replaceable with 27 mm lock inserts, type A and/or with Ergoform-S lock system (except H=270 mm); not suitable for outdoor installation |
| Suitable for | Cabinet type: VX, TS, VX SE, width: = 800 mm |
| Width | 700 mm |
| Height | 670 mm |
| Depth | 77 mm |
| Visible surface area | Viewing window width: 563 mm, viewing window height: 598 mm |
| Depth for components (max.) | 63 mm |
To conceal display and operating instruments or cut-outs, and to protect against dirt and liquids as well as unauthorised access.
Benefits: Base frame: Easily screw-fastened to the door thanks to modified dimensions (tubular door frame may be used as a drilling template).
Base frame: Readily height-adjustable.
Base frame: Stabilises the door cut-out.
Base frame: Conceals the cut edge.
Base frame: The rain canopy prevents dirt from landing on the seal, protects the glass from being lifted out, prevents the ingress of dirt and moisture when opening the window.
Base frame: Frame section height 30 mm or 60 mm
Viewing window: Made from single-pane safety glass: High level of resistance to solvents and scratches, anti-static, reduced risk of injury if broken.
Viewing window: Hinge with 180° opening angle, easily inserted.
Material: Extruded aluminium section with die-cast zinc corner pieces and single-pane safety glass.
Surface finish: Base frame: Powder-coated on the outside in RAL 7035
Hinge and lock section: Natural-anodised
Protection category IP to IEC 60 529: IP 54
Assembly instruction: Standard double-bit lock insert may be exchanged for lock inserts 27 mm, type A, and/or for lock system Ergoform-S (except H = 270 mm).
Packs of: 1 pc(s).
EAN: 4028177476479
Customs tariff number: 76101000
eCl@ss 5.1: 27182301
eCl@ss 7.0: 27182301
ETIM 6.0: EC002527
Design: 60 section
To fit: Enclosure type: TS 8
Enclosure type: SE 8
Width: = 800 mm
Dimensions: Width: 700 mm
Height: 670 mm
Depth: 77 mm
Viewing area: Width: 563 mm
Height: 598 mm
Build depth for components (max.): 63 mm
Weight/pack: 8.65 kg