Rittal 2537500, EAN: 4028177938380

Rittal 2537500 AX Mini-comfort handle with pusher

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 2537500 AX Mini-comfort handle with pusher

Lieske Part No. 1920336
Mfg Part No 2537500
EAN-Code 4028177938380
Manufacturer Rittal
Here only 47,84 EUR
56,93 EUR incl. VAT

Further information for Rittal 2537500 AX Mini-comfort handle with pusher

General
Modelprepared for lock system KESO/KABA
MaterialZinc die-cast, plastic
Surface protectionPowder-coated
ColourRAL 7035
LockLocking type: Prepared for KESO/KABA profile half-cylinder up to total length of 42.5 mm and Ø of 22 mm
Suitable for housing typeAX with pre-drilled steel sheet, AX IT with pre-drilled closure, KX E-Box, VX partition door, CX console, CX console top, CX console middle
The Rittal AX 2537500 is a mini comfort handle, specifically designed for enclosures and housings of the AX and KX series with a draw stud. It serves as an operating element for the mechanical lock and is prepared for the KESO/KABA lock system. The handle enables comfortable and secure operation by folding forward when unlocking and then swinging to open the lock. The design is intended for the installation of half cylinders and lock inserts according to DIN 18 252, ensuring standardized and secure locking technology.

Applications

The handle is suitable for a variety of housing types, including AX with steel sheet draw stud, AX IT with draw stud lock, KX E-Box, VX partial door, stand console CX, console top section CX, and console middle section CX. It is used in industrial plants, electrical engineering, and IT environments where secure and user-friendly access control to enclosures and control cabinets is required. The use in combination with draw studs ensures a stable and vibration-resistant mounting, which functions reliably even in moving or vibration-loaded environments.

Functions and Equipment in Detail

The handle is made of zinc die-cast and plastic, with a powder-coated surface. The color corresponds to RAL 7035, a gray-beige standard tone that integrates well in industrial environments. The design is specifically intended for use with KESO/KABA half cylinders, with a maximum total cylinder length of 42.5 mm and a diameter of 22 mm. These dimensions ensure compatible installation without additional modifications. The handle’s function is based on a folding mechanism: when unlocking, the handle folds forward and is then swung to open the lock.

Technology Explained Simply

The use of zinc die-cast ensures high mechanical stability and resistance to mechanical stress. The powder-coated surface provides good corrosion protection and is suitable for use in industrial environments. The preparation for KESO/KABA systems means the handle can be directly connected to common security cylinders widely used in industry. Compliance with DIN 18 252 for lock inserts ensures standardized and secure installation. Mounting is done on enclosures with an integrated draw stud, ensuring a firm connection between handle and housing.

Compatibility and Accessories

The handle is specifically designed for the mentioned housing types and can be directly integrated into them. It is not intended for other housing designs that lack a draw stud or compatible lock geometry. Compatibility with KESO/KABA systems allows use with common security cylinders used in many industrial installations.

Mounting and Installation

Mounting is performed on enclosures equipped with a draw stud. The handle is attached to the draw stud, with the drill holes and geometry of the draw stud ensuring correct positioning. Installation requires no special tools or additional components. The connection between handle and draw stud is mechanically stable and enables secure operation. Mounting is typically quick and can be done without additional adjustments.

Operational Advantages

The handle offers clear and intuitive operation, as unlocking and opening are simplified by the folding principle. The use of standardized lock systems such as KESO/KABA enables easy replaceability and maintenance. The robust material combination of zinc die-cast and plastic ensures long service life and resistance to mechanical stress. The powder-coated surface protects against corrosion and ensures a uniform visual appearance. The color RAL 7035 integrates well into industrial environments and is visually neutral.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1920336
qrcode für Rittal 2537500 AX Mini-comfort handle with pusher