| General |
| Model | Prepared for ASSA locking system. |
| Material | Zinc die-cast, plastic |
| Surface protection | Powder-coated |
| Colour | RAL 7035 |
| Lock | Locking mechanism: Prepared for ASSA oval profile half-cylinder up to a total length of 26.9 mm |
| Suitable for housing type | AX with pre-drilled steel sheet, AX IT with pre-drilled closure, KX E-Box, VX partition door, CX console, CX console top, CX console middle |
The Rittal AX 2537400 is a mini comfort handle, specifically developed for enclosures and housings of the AX, KX series and associated variants with latch. It serves as a mechanical handle for operating the locking system and is prepared for the ASSA locking system. The handle enables opening of the lock by swinging the unlocked handle forward, thereby activating the integrated latch function. The design is intended for installation of profile half-cylinders and lock inserts according to DIN 18 252, with the ASSA and KESO/KABA versions specifically designed for profile half-cylinders.
Mini comfort handle
The handle is compactly dimensioned and serves as an ergonomic operating unit for enclosure doors. It is made of zinc die-cast and plastic, with the metallic parts powder-coated. The surface is finished in RAL 7035, providing a neutral gray tone that integrates well in industrial environments. The construction ensures robust and long-lasting use under industrial conditions.
Applications
The handle is intended for a variety of housing types, including AX with latch steel sheet, AX IT with latch lock, KX E-Box, VX partial door, stand console CX, console top section CX, and console middle section CX. It is therefore universally applicable in various enclosure configurations, particularly in installations requiring secure and convenient operation. Use is in industrial and technical installations where mechanical lock control is required.
Functions and equipment in detail
The handle is prepared for installation of an ASSA oval profile half-cylinder with a maximum total length of 26.9 mm. The preparation includes the necessary drill holes and mounting elements, allowing the lock insert to be installed directly. The handle's function is based on the latch principle: when the handle is swung, the locking mechanism is activated, enabling the door to be opened. The design is specifically tailored for the ASSA locking system, with compatibility with KESO/KABA also ensured.
Technology explained simply
The handle's construction combines mechanical stability with simple operation. Zinc die-cast provides high strength, while the plastic component shapes the handle surface ergonomically. The powder-coated surface offers corrosion protection and is suitable for industrial environments. Preparation for profile half-cylinders according to DIN 18 252 enables standardized integration into existing locking systems. The maximum length of the profile half-cylinder is 26.9 mm, allowing use with common cylinders.
Compatibility and accessories
The handle is specifically designed for the mentioned housing types, including AX, KX, VX, and CX product lines. It is not intended for other enclosure types without a latch. Use of lock inserts according to DIN 18 252 is required to ensure functionality.
Installation and mounting
Mounting is done at pre-drilled holes in the housing, with exact mounting instructions corresponding to the respective enclosure model. The handle is attached to the front of the door, with drill holes for the profile half-cylinder already prepared.
Operational advantages
The handle offers clear, mechanical operation without electrical components. The robust construction from zinc die-cast and plastic ensures long service life under industrial conditions. The RAL 7035 color ensures visual harmony with other components. Preparation for the ASSA locking system enables easy integration into existing security concepts. The function is independent of electrical power, increasing reliability.
ASSA locking system
The ASSA locking system is a standardized lock system frequently used in industrial installations. The handle's preparation for this system allows direct installation without additional modifications. Compatibility with KESO/KABA expands application possibilities, with the exact choice of lock insert adapted to specific requirements.
Zinc die-cast
Zinc die-cast is a metallic material produced by die-casting. It is characterized by high strength, good machinability, and corrosion resistance. In enclosure technology, it is commonly used for handles and mechanical components due to its sufficient stability at low weight.
Powder-coated
The powder-coated surface is a protective coating applied by electrostatic spraying and subsequent curing. It provides protection against corrosion, mechanical stress, and chemical influences. RAL 7035 is a standardized gray tone frequently used in industrial environments.
DIN 18 252
The DIN 18 252 standard specifies requirements for lock inserts in enclosures. The handle's preparation for this standard ensures interoperability with standardized locking systems and enables uniform installation in various installations.
Profile half-cylinder
A profile half-cylinder is a lock cylinder used in enclosures and technical housings. It is integrated into the handle and enables mechanical unlocking of the lock. The maximum length of 26.9 mm is sufficient for most standard applications.
Latch
A latch is a mechanical element that activates the locking mechanism when the handle is turned or swung. It ensures the door can only be opened when the handle is moved to the correct position, increasing security and preventing accidental opening.
AX and KX
The AX and KX series are enclosure and housing lines from Rittal developed for industrial applications. The AX series includes enclosures with integrated locking mechanisms, while the KX series is specifically designed for E-Boxes and other compact housings. The handle is specifically designed for these series to ensure optimal fit and function.