| General |
| Model | Power supply, 2-pole (with socket, without plug) |
| Colour | Orange |
| Cross section | 1,5 mm² |
| Length | 3.000 mm |
| Rated operating voltage | 100 V - 240 V, 1~, 50 Hz/60 Hz |
The
connection cable SZ 2500420 from
Rittal is a
2-pole feed cable for connecting
LED system lights. It serves as a
power supply cable and is specifically designed for use in
home automation systems and
electrical installations. The cable is coloured
orange, which enables visual differentiation from other cables and simplifies identification during the installation process. With a
length of 3,000 mm, it provides sufficient reach for typical mounting requirements in enclosures or at wall-mounted points.
Applications
The cable is primarily intended for connecting
LED system lights, particularly in industrial or commercial environments where
safe and reliable power supply is required. It is suitable for
indoor installations in enclosures, distribution boxes, or at wall-mounted points, where a
2-pole supply with a voltage of
100 V to 240 V is needed. The
frequency compatibility for 50 Hz and 60 Hz also makes it suitable for use in various countries with different power grid standards.
Functions and Equipment in Detail
The
connection cable is designed as a
feed cable, with the
socket integrated at the end of the cable, while no plug is included. This enables a
quick and secure connection to the corresponding socket terminals of the LED system light. The
cross-section of 1.5 mm² ensures sufficient current transmission for typical loads of LED lighting systems, with the cable rated for an
operating voltage of 100 V to 240 V. This voltage range covers common mains voltages in Europe and other regions.
Technology Explained Simply
The
cross-section of 1.5 mm² is standard for current transmission in electrical installations and ensures sufficient conductivity to minimise heat losses and voltage drops. The
length of 3,000 mm allows flexible positioning of the light relative to the power supply point, without requiring additional extensions. The
orange colour serves as a visual identifier to make the cable easily recognisable within the installation network, especially in complex control systems.
Compatibility and Accessories
The cable is specifically designed for the
LED system light from Rittal and is used as a
feed cable. Compatible accessories available in the range include
cable ties with a length of 150 mm, which can be used for proper securing and routing of the cable within the enclosure or on the wall. These cable ties support neat and structured cabling, which facilitates maintenance and inspection.
Mounting and Installation
Installation is performed by simply inserting the
socket into the corresponding connection point of the LED system light. The cable is
without plug, so it is directly inserted into the designated socket terminals. No additional tools are required, as the connection is mechanical. The
length of 3,000 mm allows flexible positioning of the light, with the cabling within the enclosure or on the wall properly routed and secured.
Advantages in Operation
The
connection cable provides
fast and reliable power supply for LED system lights. The
2-pole design ensures a secure electrical connection, and the
operating voltage of 100 V to 240 V covers most common mains voltages. The
orange colour supports identification within the installation network, facilitating maintenance and fault diagnosis. The
length of 3,000 mm offers sufficient flexibility for mounting in various environments.
Scope of Delivery
The packaging unit includes
5 pieces of the connection cable. The specifications refer exclusively to the described cable.