| General |
| Model | Power supply, 2-pole (with socket, without plug) |
| Colour | Black |
| Length | 3.000 mm |
| AWG | AWG 18 |
| Note | Pole marking: 1 = + / 2 = - |
| Standards | Power supply cables: AVLV2, power supply plug connectors: ECBT2 |
| Rated operating voltage | 24 V (DC) |
Rittal SZ 2500410 is a
connection cable for
power supply in industrial enclosures, specifically designed for connecting
LED system lights. The product serves as a connecting element between the power supply and the lighting unit, enabling time-saving and simple installation. The cable is
2-pole, with pole identification 1 = + (positive) and 2 = – (negative), ensuring clear polarity assignment. The
rated operating voltage is 24 V (DC), which is typical for standard industrial 24-V-DC networks. The
length of the cable is 3,000 mm, providing sufficient reach for use in standard enclosures. The
color is black, which integrates well visually in industrial environments. The cable is equipped with a
socket, but without a plug, so it is connected directly at the power supply side. The
AWG size is AWG 18, corresponding to a cross-section of approximately 0.82 mm², which is sufficient for transmitting 24 V DC at low currents. The cable complies with standards
AVLV2 for power supply cables and
ECBT2 for power supply connectors, ensuring compliance with safety and quality standards in industrial electrical engineering.
Applications
The connection cable is primarily intended for use in
industrial enclosures, particularly for powering
LED system lights. These lights provide interior illumination of enclosures to ensure sufficient visibility during maintenance or inspections. The cable is designed for use in environments where a
24-V-DC power supply is available, such as in automation systems, controls, or industrial machines. The
2-pole design allows for clear polarity assignment, which is helpful during installation and maintenance.
Functions and Equipment in Detail
The cable features a
socket at one end, intended for direct connection to the power supply or a corresponding plug system. The other end is open, allowing it to be connected to the LED system light. The
pole identification (1 = +, 2 = –) is clearly defined to prevent incorrect connections. The
length of 3,000 mm provides sufficient flexibility for wiring within an enclosure without requiring additional extensions. The
AWG 18 design is suitable for low currents, typical for LED lighting systems. The
black color ensures unobtrusive integration into the enclosure environment.
Technology Explained Simply
The
rated operating voltage of 24 V DC means the cable is designed for operation with a direct voltage of 24 volts, which is a standard value in industrial electrical engineering. The
AWG 18 designation describes the cable cross-section; the smaller the AWG number, the larger the cross-section. AWG 18 is suitable for low-power applications, such as those encountered in LED lighting. The
standards AVLV2 and ECBT2 guarantee that the cable and connector meet requirements for safety, reliability, and mechanical durability in industrial applications. The
socket enables quick and secure connection at the power supply side, while the open end is connected to the light.
Compatibility and Accessories
The connection cable is specifically designed for use with
Rittal LED system lights. Compatible accessories available in the range include
cable ties L150 mm, which can be used to secure and organize the cable within the enclosure. The cable is not designed for other lighting types or voltages, as it is specifically matched to 24-V-DC systems and the socket connection type.
Installation and Mounting
Installation involves directly connecting the socket to the power supply (e.g., to a 24-V-DC source or distributor) and then connecting the open end to the LED system light. The
pole identification (1 = +, 2 = –) must be observed to ensure correct power supply. The
length of 3,000 mm allows flexible positioning of the light within the enclosure.
Operational Advantages
The connection cable simplifies the installation of LED system lights in enclosures, as it can be directly connected to the power supply without additional adapters or extensions. The clear
pole identification reduces the risk of incorrect connections. The
24-V-DC operating voltage is widely used in industry, making the cable suitable for many application scenarios. The
length of 3,000 mm provides sufficient flexibility for use in standard enclosures. Compliance with standards
AVLV2 and
ECBT2 ensures reliable and safe operation in industrial environments.