| General |
| Material | Brass, seal: CR/NBR |
| Surface protection | nickel-plated |
| Degree of protection IP according to IEC 60 529 | IP 68 (5 bar, 30 min) |
| Height | 28 mm |
| Thread | M16 x 1.5 |
| Thread length | 7 mm |
| Minimum cable diameter | 5 mm |
| Max. cable diameter | 10 mm |
| Operating temperature range | -40 °C...100 °C |
| Torque | 9 Nm |
| Wrench width | 20 mm |
| Type rating according to UL 50E | Type 4X |
The Rittal SZ 2411811 is a cable gland made of brass, designed for use in industrial enclosures and housings. It features a thread M16 x 1.5 and is intended for cables with a diameter of 5 to 10 mm. The cable gland is equipped with integrated clamping lamellae that ensure even tightening and enable cable-friendly strain relief. The surface is nickel-plated, providing high corrosion resistance and good electrical conductivity. The packaging unit contains 15 pieces.
Applications
This cable gland is suitable for use in enclosures, control and distribution boxes, and other closed housings where secure and tight cable routing is required. It is particularly suitable for applications in industry where high mechanical loads, moisture, or aggressive environmental conditions occur. The protection rating IP 68 (5 bar, 30 min) according to IEC 60 529 makes it suitable for outdoor use or in wet environments, as it is dust-tight and waterproof. The operating temperature range of -40 °C to 100 °C allows use in extreme environments, such as those found in manufacturing, power generation, or machine building.
Functions and Equipment in Detail
The integrated clamping lamellae ensure that the cable is tightened evenly and without overloading. This prevents damage to the cable sheath and reduces the risk of breaks or circuit interruptions. The sealing made of CR/NBR ensures a tight seal against dust, water, and other environmental influences. The cable gland is supplied with a lock nut, which is offered together with the gland in a single packaging unit. This reduces ordering effort and storage requirements, as both components are always available together.
Technology Explained Simply
The IP 68 protection rating means the gland is completely protected against dust and does not allow water ingress even under pressurized water (5 bar, 30 minutes). This is particularly important in environments where cleaning processes using high-pressure washers or spray water occur. The nickel-plated surface increases corrosion resistance and ensures good electrical contact quality. The torque of 9 Nm is the recommended tightening force to ensure a secure and tight connection without damaging the thread. The wrench size is 20 mm, enabling installation with a suitable wrench.
Compatibility and Accessories
The cable gland is designed for cables with a diameter of 5 to 10 mm. It can be mounted in enclosures and housings with corresponding drill holes or threaded connections. The combination of cable gland and lock nut in a single packaging unit simplifies planning and installation, as no additional orders are required. The type rating according to UL 50E, Type 4X, confirms suitability for use in damp and dusty environments, especially in industrial applications.
Installation and Mounting
Installation is performed by inserting the cable into the gland and then tightening the gland with a wrench to the specified torque of 9 Nm. The lock nut is also tightened to secure the gland. The integrated clamping lamellae ensure even cable loading and prevent damage. The height of the gland is 28 mm, which must be considered when planning the housing opening.
Operational Advantages
The cable gland provides reliable and tight cable routing that remains stable even under harsh operating conditions. The integrated clamping lamellae protect the cable from mechanical stress and extend the service life of the installation. The nickel-plated surface ensures high corrosion resistance, increasing maintenance-free operation. The packaging unit with 15 pieces enables efficient ordering and storage, especially for larger projects or series installations. The IP 68 protection rating and operating temperature range of -40 °C to 100 °C make the gland suitable for a wide range of industrial applications without requiring additional protective measures.