| General |
| Material | Polyamide 6, seal: CR/NBR |
| Colour | RAL 7035 |
| Degree of protection IP according to IEC 60 529 | IP 68 (5 bar, 30 min) |
| Height | 53 mm |
| Thread | M63 x 1.5 |
| Thread length | 18 mm |
| Minimum cable diameter | 34 mm |
| Max. cable diameter | 44 mm |
| Operating temperature range | -30 °C...100 °C |
| Torque | 25 Nm |
| Wrench width | 65 mm |
| Type rating according to UL 50E | Type 1, Type 4, Type 4X, Type 12, Type 13 |
The Rittal SZ 2411671 is a
cable gland made of
Polyamide 6 with integrated clamping lamellae, designed for use in industrial enclosures and housings. It ensures secure and strain-resistant fixation of cables with a diameter between 34 mm and 44 mm to metallic or non-metallic enclosure walls. The gland is manufactured in size M63 x 1.5 and offers high mechanical stability as well as reliable sealing against dust and liquids. The colour corresponds to RAL 7035, a grey standard shade commonly used in industry.
Applications
The cable gland is suitable for use in environments with high requirements for environmental resistance. It is used in industrial electrotechnics, machine building, automation technology, and process automation, where permanent and secure cable routing is required. The protection rating IP 68 (5 bar, 30 min) makes it suitable for outdoor use or in damp, dusty environments. The operating temperature range of -30 °C to 100 °C allows use in various climatic conditions, for example in cooling systems, heating systems, or the food industry.
Functions and Equipment in Detail
The gland features integrated clamping lamellae that ensure even cable clamping and provide cable-friendly strain relief. This prevents tearing or damage to the cable insulation under mechanical stress. The seal is made of CR/NBR, an elastic material that ensures tight sealing against dust and water. The lock nut is included in the same packaging unit as the gland, reducing ordering and storage effort.
Technology Explained Simply
The protection rating IP 68 means the gland is dust-tight and protects against continuous water exposure up to a pressure of 5 bar for 30 minutes. This corresponds to a high protection level, sufficient even under immersion or spray water conditions. The M63 x 1.5 thread allows secure fastening to matching threaded holes. The thread length is 18 mm, which is sufficient to ensure a stable connection. The required torque is 25 Nm, which can be achieved using an appropriate wrench (wrench size 65 mm).
Compatibility and Accessories
The cable gland is designed for cables with a diameter of 34 mm to 44 mm. It is compatible with enclosures and housings that have a corresponding threaded hole. The gland is available in a packaging unit of three pieces, simplifying ordering and storage. The certification according to UL 50E (Type 1, Type 4, Type 4X, Type 12, Type 13) demonstrates suitability for various industrial applications in the USA and Canada.
Installation and Mounting
Installation is carried out by inserting the gland into the designated hole and then tightening the lock nut with an appropriate wrench. The clamping lamellae ensure that the cable is evenly clamped and no mechanical stresses occur. The gland is designed for easy and quick installation, with the specified torque requirement (25 Nm) must be observed to ensure a secure connection.
Advantages in Operation
The integrated lock nut in the packaging unit reduces ordering and storage effort. Cable protection provided by the clamping lamellae extends cable lifespan and reduces maintenance costs. The high protection rating IP 68 and the wide operating temperature range ensure reliable performance in demanding environments. The use of Polyamide 6 as material ensures high mechanical strength and chemical resistance against many industrial chemicals.