| General |
| Material | Polyamide 6, seal: CR/NBR |
| Colour | RAL 7035 |
| Degree of protection IP according to IEC 60 529 | IP 68 (5 bar, 30 min) |
| Height | 47,5 mm |
| Thread | M40 x 1.5 |
| Thread length | 10 mm |
| Minimum cable diameter | 19 mm |
| Max. cable diameter | 28 mm |
| Operating temperature range | -30 °C...100 °C |
| Torque | 12 Nm |
| Wrench width | 46 mm |
| Type rating according to UL 50E | Type 1, Type 4, Type 4X, Type 12, Type 13 |
The Rittal SZ 2411651 is a cable gland made of polyamide 6, specifically designed for use in industrial enclosures and housings. It is intended for the secure and tight fixation of cables with a diameter between 19 mm and 28 mm in switchgear, control systems, or other electrical installations. The gland features an M40 x 1.5 thread and is equipped with a sealing gasket made of CR/NBR, ensuring high sealing performance. The colour corresponds to RAL 7035, a grey standard tone commonly used in industrial applications.
Applications
The cable gland is suitable for use in environments with high requirements for protection rating. It meets the IP 68 protection rating according to IEC 60 529, meaning it is dust-tight and protected against continuous water immersion up to a pressure of 5 bar for 30 minutes. This makes it particularly suitable for outdoor use, in damp or wet environments, and in production facilities with high cleanliness requirements. The UL 50E certification in types 1, 4, 4X, 12, and 13 extends its application range in North American markets, where this classification applies to specific environmental conditions.
Functions and Equipment in Detail
The gland is equipped with clamping lamellae that ensure even cable clamping and provide cable-friendly strain relief. This prevents damage to the cable insulation and ensures a stable mechanical connection. The thread length is 10 mm, allowing sufficient anchoring in the control panel or housing. The wrench size of 46 mm enables secure installation using an appropriate wrench. The gland is supplied in a packaging unit of 5 pieces, reducing additional ordering effort and storage space.
Technology Explained Simply
The choice of polyamide 6 material provides high mechanical strength and resistance to chemical influences, especially in industrial environments. The sealing gasket made of CR/NBR (chloroprene or nitrile butadiene rubber) ensures reliable sealing against dust and moisture. The IP 68 protection rating means the gland can operate under water pressure of 5 bar for 30 minutes without water ingress. The operating temperature range of -30 °C to 100 °C allows use in extreme climatic conditions, from cold warehouses to hot production environments. The specified torque of 12 Nm ensures secure but not excessive fastening, preventing material overload.
Compatibility and Accessories
The cable gland is designed for cables with a diameter of 19 to 28 mm, making it suitable for medium to large conductors in industrial installations. It is part of the Rittal SZ system and can be combined with other components of this system to ensure consistent and standardised installation. Its use in enclosures and housings with corresponding M40 thread holes is intended.
Installation and Mounting
Installation is performed by inserting the cable into the gland and then tightening the gland with a wrench to the specified torque of 12 Nm. The clamping lamellae ensure the cable is held evenly, preventing damage from uneven strain. The height of the gland is 47.5 mm, which must be considered during planning of the control panel or housing.
Operational Advantages
The cable gland provides a reliable, tight, and mechanically stable connection that remains effective even under demanding environmental conditions. The integrated lock nut included in the packaging unit reduces ordering effort and simplifies inventory management. The materials are designed for industrial use and ensure a long service life. The combination of high protection rating and chemical resistance makes the gland a robust solution for demanding applications.