| General |
| Model | TH 35/15 |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Length of busbar | 487 mm |
| Suitable for | Housing type: AX, KX, AE, KL; Width: = 500 mm |
| PCF/VE (Cradle-to-Gate) | 11.94 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The SZ 2318000 is a support rail from manufacturer Rittal, manufactured in accordance with standard EN 60 715, intended for mounting components and switching elements in enclosures. The rail features the TH 35/15 profile and is made of sheet steel, with a zinc-coated surface to ensure corrosion protection. The length of the support rail is 487 mm, designed to match the enclosure width of 500 mm. The rail is compatible with various enclosure types, including AX, KX, AE and KL, and is typically used in enclosures with an exact width of 500 mm.
Support rail is the central component used for securing electrical parts such as switches, relays, connectors or power semiconductors. The
TH 35/15 profile corresponds to a standard profile widely used in industrial electrical engineering, enabling secure and mechanically stable mounting. The
zinc coating of the surface provides enhanced protection against environmental influences such as moisture and fine dust, which is particularly advantageous in industrial applications.
The rail is specifically designed for enclosures with a width of 500 mm, with its length of 487 mm tailored to these enclosure dimensions to ensure optimal space utilisation and precise mounting. Compatibility with enclosure types AX, KX, AE and KL allows for flexible use in various enclosure configurations. Mounting is typically done via screw fastening to the inner walls of the enclosure, where the rail provides the necessary load-bearing capacity for the mounted components.
The
material choice of sheet steel offers sufficient strength and stiffness to withstand mechanical loads during operation. The zinc-coated surface extends the service life of the rail and reduces maintenance frequency. The rail is supplied in a packaging unit of 10 pieces, which is advantageous for use in larger installations or series mounting.
The
standard EN 60 715 defines the geometric and mechanical requirements for support rails in electrical switchgear. Compliance with this standard ensures interoperability with other components and adherence to safety and quality standards. The rail is therefore suitable for use in industrial and technical installations where standardised mounting and high reliability are required.
The rail is typically used in enclosures employed in industrial automation, power supply or process control. Mounting is done by fastening to the inner walls of the enclosure, where the rail serves as a carrier for electrical components. The length of 487 mm allows for optimal use of available space in enclosures with a width of 500 mm.
The packaging unit of 10 pieces is suitable for use in larger projects or series mounting. The rail is not supplied with additional mounting accessories such as screws or wall plugs, but serves as a pure mounting profile. Mounting is typically done using standardised screws, which must be selected according to the enclosure construction and component weight.
The rail is designed for use in enclosures with a width of 500 mm, with its length of 487 mm matched to these dimensions. Compatibility with enclosure types AX, KX, AE and KL enables flexible use in various enclosure configurations. Mounting is done by fastening to the inner walls of the enclosure, where the rail provides the necessary load-bearing capacity for the mounted components.
The
support rail is a fundamental component in electrical installation, enabling the mounting of components in enclosures. The
TH 35/15 profile is a standard profile widely used in industry. The
zinc coating of the surface provides corrosion protection, and the
sheet steel ensures sufficient strength. The rail is designed for enclosures with a width of 500 mm and is supplied in a packaging unit of 10 pieces.
The rail is suitable for use in industrial installations where standardised mounting and high reliability are required. Compliance with standard EN 60 715 ensures interoperability with other components. Mounting is done by fastening to the inner walls of the enclosure, where the rail serves as a carrier for electrical components. The length of 487 mm allows for optimal use of available space in enclosures with a width of 500 mm.
The rail is typically used in enclosures employed in industrial automation, power supply or process control. Mounting is done by fastening to the inner walls of the enclosure, where the rail provides the necessary load-bearing capacity for the mounted components. The length of 487 mm allows for optimal use of available space in enclosures with a width of 500 mm.
The packaging unit of 10 pieces is suitable for use in larger projects or series mounting. The rail is not supplied with additional mounting accessories such as screws or wall plugs, but serves as a pure mounting profile. Mounting is typically done using standardised screws, which must be selected according to the enclosure construction and component weight.
The rail is designed for use in enclosures with a width of 500 mm, with its length of 487 mm matched to these dimensions. Compatibility with enclosure types AX, KX, AE and KL enables flexible use in various enclosure configurations. Mounting is done by fastening to the inner walls of the enclosure, where the rail provides the necessary load-bearing capacity for the mounted components.
The
support rail is a fundamental component in electrical installation, enabling the mounting of components in enclosures. The
TH 35/15 profile is a standard profile widely used in industry. The
zinc coating of the surface provides corrosion protection, and the
sheet steel ensures sufficient strength. The rail is designed for enclosures with a width of 500 mm and is supplied in a packaging unit of 10 pieces.
The rail is suitable for use in industrial installations where standardised mounting and high reliability are required. Compliance with standard EN 60 715 ensures interoperability with other components. Mounting is done by fastening to the inner walls of the enclosure, where the rail serves as a carrier for electrical components. The length of 487 mm allows for optimal use of available space in enclosures with a width of 500 mm.