| General |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Suitable for housing type | AX stainless steel |
| Suitable for height | = 1.200 mm |
The Rittal AX 2311120 is a
door hole strip made of
sheet steel with a
zinc-coated surface, specifically designed for enclosures of type
AX stainless steel with a
door height of 1,200 mm. It serves as a mounting element on the door to securely and stably attach mounting rail systems, system chassis with dimensions 14 x 39 mm, or door latches. The strip is mounted vertically onto the threaded bolts of the door, ensuring a precise and load-bearing connection for further components within the enclosure.
Applications
The door hole strip is used in industrial environments where stainless steel enclosures are required for high corrosion resistance and mechanical durability. It is particularly suitable for environments with high hygiene requirements, such as in the food industry or pharmaceuticals, as well as in outdoor areas or humid rooms where stainless steel enclosures offer advantages. The strip enables the integration of mounting elements necessary for installing controls, switching devices, or display units.
Functions and Equipment in Detail
The strip is designed for mounting onto the threaded bolts of the enclosure door, ensuring a secure and repeatable fastening. The zinc-coated surface provides additional corrosion protection, extending the service life of the component. The strip is designed for use with mounting rails and system chassis 14 x 39 mm, enabling standardization of mounting within the Rittal system. The packaging unit includes 2 pieces, sufficient for mounting on both doors of an enclosure.
Technology Explained Simply
The
door hole strip is a passive mounting element that does not perform any electrical function, but mechanically enables the mounting of further components. The
zinc-coated surface protects the sheet steel from oxidation and is particularly suitable for environments with increased humidity. The
threaded bolt mounting on the door ensures a stable and slip-resistant connection that remains secure even with frequent opening and closing of the door. The strip is not intended for direct mounting of electrical components, but serves as an intermediate element for mounting rail systems.
Compatibility and Accessories
The door hole strip is specifically designed for enclosures of type
AX stainless steel with a
door height of 1,200 mm. Compatible accessories include mounting rail systems such as
VX/TS width/depth 800 mm,
TS mounting rail for door width 500 mm,
TS mounting rail for door width 400 mm,
mounting rail for VX, TS, VX SE, TP, AX 540 mm,
TS mounting rail for door width 760 mm, and
TS mounting rail for door width 380 mm. These rails can be mounted onto the door hole strip to enable structured mounting of devices within the enclosure. Additionally,
screws type ST 4.8 L9.5 mm are available as suitable accessories for mounting the rails onto the strip.
Installation and Mounting
Installation is performed by fastening the door hole strip to the pre-defined threaded bolts on the enclosure door. The strip is aligned vertically and screwed onto the bolts. Subsequently, mounting rail systems or other components that are to be attached to the pre-drilled holes in the strip can be installed. The use of appropriate screws (e.g. ST 4.8 L9.5 mm) is recommended to ensure a secure connection. Installation requires no special tools other than a screwdriver or suitable wrench.
Operational Advantages
The door hole strip provides a standardized and secure mounting option for accessories within the enclosure. The use of sheet steel with a zinc-coated surface ensures high mechanical stability and corrosion resistance. Compatibility with various mounting rail systems allows flexible adaptation to different mounting requirements. The strip is easy to install and ensures clean and orderly fastening of components, facilitating maintenance and inspection of the enclosure. The delivery in a pack of 2 pieces enables simultaneous mounting on both doors of an enclosure, reducing installation time.