| General |
| Model | Wall-mounted IT enclosure |
| Material | Wall and swivel part: Sheet steel, 1.5 mm, viewing panel: Single-pane safety glass, 3 mm |
| Surface protection | Powder-coated |
| Colour | wall and swivel part: RAL 7035, vision door: RAL 7035/7015 (slate grey) |
| Scope of delivery | Wall section: closed flange plate, top and bottom, swivel section with 25 mm hole pattern in front and rear frame and two 19" profile rails, front, fixed installation, design vision door, design vision door lock: safety lock 3524 E, middle section lock: 3 mm double latch, 2 Blue e+ exit filters 3238.300 (loose), mini comfort handle |
| Height units | 9 HE |
| Width | 600 mm |
| Height | 478 mm |
| Depth | 673 mm |
| Built-in depth | 620 mm |
| Light dimensions | Clear width: 502 mm, clear height: 417 mm |
| Depth of swivel part | 516 mm |
| Depth of wall part | 135 mm |
| Number of locks | 1 |
| IK code | IK08 |
| Load capacity of swivel part (static) | 450 N |
| Load capacity wall part (static) | 150 N |
| Base material | steel sheet |
| Lock | Locking system: Mini comfort handle, lock insert: Security lock insert No. 3524 E |
| Degree of protection IP according to EN 60 529 | IP 54 with flange plate closed top and bottom |
Rittal AX2260965 is a three-piece wall-mounted enclosure from the AX series, designed for use in IT and industrial applications. It has a total height of 478 mm, a width of 600 mm, and a depth of 673 mm, with an installation depth of 620 mm. The enclosure comprises 9 height units (HE) and is therefore suitable for mounting standard 48,3 cm ( 19 inch ) devices. The three-piece construction consists of a wall section, a swing section, and a design viewing door, ensuring easy and secure access to installed components. The enclosure is made of steel sheet with a thickness of 1.5 mm and is powder-coated, with the wall and swing sections painted in RAL 7035 (slate grey) and the viewing door in a combination of RAL 7035/7015 (slate grey). The viewing panel is made of single-pane safety glass with a thickness of 3 mm.
Applications
This wall-mounted enclosure is designed for use in industrial environments as well as in IT infrastructures, where compact and robust mounting of network or control technology on the wall is required. The design is particularly suitable for spaces with limited room, as it is mounted on the wall and does not occupy floor space. The IP rating of 54, combined with closed gland plates at the top and bottom, protects against dust and splashing water, making it suitable for use in indoor environments with moderate environmental stress. The IK code IK08 ensures mechanical resistance against impact, making the enclosure suitable for environments with increased mechanical stress.
Functions and Equipment in Detail
The swing section is equipped with a 25 mm hole grid in the front and rear frame, enabling flexible device mounting. Two 48,3 cm ( 19 inch ) profile rails are integrated in the front of the swing section to securely mount standard IT or control units. The design viewing door provides clear visibility of installed components without needing to open the door. The door is fitted with a safety lock 3524 E, ensuring secure closure. The middle section is secured with a 3 mm double bar. A mini comfort handle enables convenient operation of the viewing door. Two Blue e+ outlet filters (type 3238.300) are supplied loose and serve to filter air, maintaining indoor cleanliness.
Technology Explained Simply
The construction of the enclosure allows for secure and accessible mounting of devices. The static load capacity of the swing section is 450 N, equivalent to a load of approximately 45.9 kg, while the wall section has a load capacity of 150 N (approx. 15.3 kg). The clear dimensions are 502 mm (width) and 417 mm (height), defining the available space for devices. The depth of the swing section is 516 mm, while the wall section has a depth of 135 mm. The use of steel sheet and single-pane safety glass ensures high mechanical stability and safety. The IP54 protection rating protects against dust and splashing water, sufficient for use in indoor environments with moderate environmental stress. The safety lock 3524 E provides a high protection standard against unauthorized access.
Compatibility and Accessories
The enclosure is part of the AX/VX system kit and can be expanded with various accessories. These include, for example, 48,3 cm ( 19 inch ) fasteners, earthing rails, routing panels, component shelves, C-profile rails, fan extension kits, IT system lights, VX system chassis, wall mounting brackets, and mounting plates for terminal boxes. These components allow for individual adaptation to specific requirements. Mounting plates for terminal boxes (e.g. 1560900, 1565800) and wall mounting brackets (e.g. 1590010) support integration into existing systems.
Installation and Mounting
Installation is carried out on the wall using the integrated wall section, which is equipped with closed gland plates at the top and bottom. Fixing is done via the designated mounting points on the wall section. The swing section is attached to the wall section, taking into account the static load capacity of 450 N for the swing section and 150 N for the wall section. Device mounting is done via the 48,3 cm ( 19 inch ) profile rails and the 25 mm hole grid. The design viewing door is secured with the safety lock 3524 E, with the mini comfort handle facilitating operation.
Operational Advantages
The three-piece design allows easy access to installed devices without having to open the entire enclosure. The IP54 protection rating and IK08 code ensure high reliability in various environments. The integrated profile rails and hole grid offer flexibility in mounting. The loose outlet filters Blue e+ support air purification inside the enclosure. The powder-coated surface ensures high corrosion resistance and an attractive appearance. The use of steel sheet and safety glass guarantees long service life and high mechanical stability.