Rittal 2260930, EAN: 4028177983144

Rittal 2260930 wall enclosure 3-piece 9HE

Rittal 2260930 wall enclosure 3-piece 9HE

Lieske Part No. 1989795
Mfg Part No 2260930
EAN-Code 4028177983144
Manufacturer Rittal
Here only 622,15 EUR
740,36 EUR incl. VAT

Further information for Rittal 2260930 wall enclosure 3-piece 9HE

General
ModelWall-mounted IT enclosure
MaterialWall and swivel part: Sheet steel, 1.5 mm, viewing panel: Single-pane safety glass, 3 mm
Surface protectionPowder-coated
Colourwall and swivel part: RAL 7035, vision door: RAL 7035/7015 (slate grey)
Scope of deliveryWall section: closed flange plate, top and bottom, swivel section with 25 mm hole pattern in front and rear frame and two 19" profile rails, front, fixed installation, design vision door, locking middle section: 3 mm double bar, locking design vision door: safety lock 3524 E, mini comfort handle
Height units9 HE
Width600 mm
Height478 mm
Depth373 mm
Built-in depth320 mm
Light dimensionsClear width: 502 mm, clear height: 417 mm
Depth of swivel part216 mm
Depth of wall part135 mm
Number of locks1
Load capacity of swivel part (static)450 N
Load capacity wall part (static)150 N
Base materialsteel sheet
LockLocking system: Mini comfort handle, lock insert: Security lock insert No. 3524 E
Degree of protection IP according to EN 60 529IP 54 with flange plate closed top and bottom
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal AX 2260930 is a three-piece wall-mounted enclosure of the IT series, designed for use in technical installations where compact and flexible mounting of IT and electrical equipment on a wall is required. The enclosure consists of a wall section, a swing section, and a design viewing door, ensuring easy access to installed components. Dimensions are 600 mm width, 478 mm height, and 373 mm depth, with an installation depth of 320 mm. The enclosure provides space for 9 U, making it suitable for installing standard 48,3 cm ( 19 inch ) equipment.

Applications
This wall-mounted enclosure is suitable for use in industrial environments, office buildings, building automation, and IT infrastructures, where a compact, wall-mounted solution for network or control technology is needed. The three-piece design allows for flexible use, as the swing section can be pivoted 90 degrees outward to allow maintenance or installation of devices inside. The closed gland plates at the top and bottom of the wall section ensure secure and dust-tight coverage of cable connections.

Functions and Equipment in Detail
The enclosure is made of steel sheet with a thickness of 1.5 mm and is powder-coated, providing high corrosion resistance and uniform surface quality. The color of the wall and swing sections is RAL 7035; the viewing door features a two-tone design: RAL 7035/7015 (slate gray). The viewing pane is made of single-pane safety glass with a thickness of 3 mm, allowing clear visibility of installed devices without compromising safety. The swing section is equipped with a 25 mm hole pattern in the front and rear frame, enabling flexible mounting of devices and accessories. Two 48,3 cm ( 19 inch ) profile rails are mounted at the front to securely fasten standard IT equipment.

Technology Explained Simply
The protection rating IP 54 according to EN 60 529 is achieved in combination with the closed gland plates at the top and bottom. This means the enclosure is protected against dust and splashing water, making it suitable for indoor use in environments with increased contamination risk or occasional splashing water exposure. The static load capacity of the swing section is 450 N, while the wall section has a static load capacity of 150 N. The locking mechanism consists of a mini comfort handle with a safety lock insert No. 3524 E, enabling secure and convenient operation. The clear dimensions are 502 mm width and 417 mm height, defining the effective mounting space for devices.

Compatibility and Accessories
The AX 2260930 is part of the AX/VX system kit and can be combined with various accessories to meet specific requirements. These include, for example, cable routing panels, mounting plates for terminal boxes, earthing rails, wall mounting brackets, and component shelves in various heights and load capacities. The 48,3 cm ( 19 inch ) profile rails and 25 mm hole pattern allow mounting of standard components. The design viewing door is optionally replaceable with other locking variants, such as a mini comfort handle for half cylinders.

Mounting and Installation
Mounting is done on a wall using the pre-drilled holes in the wall section. The installation depth of 320 mm must be considered during wall mounting planning to ensure secure and stable fastening. The wall section has a depth of 135 mm, while the swing section has a depth of 216 mm. The fixed installation of the swing section enables secure mounting of devices inside. The closed gland plates at the top and bottom ensure proper cable routing and prevent ingress of foreign objects.

Operational Advantages
The three-piece structure of the enclosure offers a high degree of accessibility and ease of maintenance. The design viewing door with safety locking allows secure access to devices, while the powder-coated surface provides high mechanical and chemical resistance. The combination of steel sheet and safety glass ensures a robust and transparent construction. The IP 54 protection rating ensures reliable operation in environments with increased contamination risk. Compatibility with the AX/VX system kit allows flexible expansion and adaptation to different requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1989795
qrcode für Rittal 2260930 wall enclosure 3-piece 9HE