| General |
| Material | Door and door frame: steel sheet |
| Surface protection | Door: powder-coated, textured lacquer, door frame: galvanised |
| Colour | Door: RAL 7035 |
| Scope of delivery | Door, deadbolt lock with 3 mm double bar insert, including mounting screws |
| Mounting options | In AX plastic at mounting domes in the side walls |
| Note | Standard double-barrel lock insert, replaceable with lock inserts 27 mm, type A |
| Suitable for housing type | AX plastic |
| Suitable for width | = 600 mm |
| Suitable for height | = 600 mm |
| Door material thickness | 1 mm |
| Door opening angle | 105° |
The Rittal SZ 1485766 is an internal door for plastic enclosures of type AX, specifically designed for enclosures with a width and height of 600 mm each. It serves as
access protection and enables a clear
separation between operating and technical levels within the enclosure. The door is made of
sheet steel and is supplied with a
powder-coated, structured finish in the color
RAL 7035. The door frame is
galvanized, providing an additional corrosion protection layer. The
material thickness of the door is 1 mm, ensuring sufficient stability while maintaining low weight.
Applications
The internal door is intended for use in
plastic enclosures of type AX, particularly in systems where secure and organized separation of operating elements and electrical components is required. It is suitable for industrial applications where orderly access to the internal components of the enclosure must be ensured without opening the entire enclosure door. The door is mounted on the
mounting domes in the side panels of the AX enclosure, enabling secure and stable anchoring.
Functions and Equipment in Detail
The door is equipped with a
latch lock featuring a
3 mm double bar lock insert. This lock is standard and can be replaced, if required, with other lock inserts of 27 mm width, type A. The delivery includes the door itself, the latch lock with the double bar insert, and the
necessary mounting screws. The
door opening angle is 105°, providing sufficient clearance for access to the internal components of the enclosure.
Technology Explained Simply
The use of
sheet steel for the door and door frame ensures high mechanical strength and durability. The
powder-coated surface provides a uniform, abrasion-resistant, and corrosion-resistant coating suitable for industrial environments. The
galvanized door frame construction offers additional protection against corrosion, especially at edges and mounting points. The
RAL 7035 color is a gray, neutral tone that integrates well in industrial environments and ensures good visibility of the door.
Compatibility and Accessories
The internal door is exclusively designed for
plastic enclosures of type AX with dimensions of
600 mm width and 600 mm height. Installation is carried out at the designated
mounting domes in the side panels of the enclosure. The double bar lock insert is interchangeable, allowing other lock variants with 27 mm width, type A, to be used if needed.
Mounting and Installation
Installation is performed by securing the door to the integrated
mounting domes in the side panels of the AX enclosure. The included
mounting screws enable secure and easy installation. The door opens to an angle of
105°, ensuring sufficient access to the internal components of the enclosure.
Operational Advantages
The internal door provides a clear
separation between operating and technical levels, enhancing safety and clarity during operation. The
secure locking function via the latch lock with double bar insert ensures that internal components are accessible only to authorized personnel. The
stable sheet steel construction and
powder-coated surface ensure long service life even under industrial conditions. The
simple mounting to the mounting domes of the AX enclosure reduces installation effort and enables quick integration into existing systems.