| General |
| Nominal voltage | 4,8 V |
| Voltage per cell | 1,2 V |
| Capacity | 600 mAh |
| Operation temperature | 20 °C |
| Conformity | 200/66/EC, 2013/56/EU |
The replacement accumulator for the RED emergency light Follow me® 5W is a rechargeable, high-temperature-resistant accumulator specifically developed for the LED emergency wall-ceiling light Follow me® 5W. It replaces the accumulator integrated in the device, thereby extending the service life of the emergency light. Installation is carried out via plug contacts, enabling a plug & play solution and allowing mounting without additional tools or complex adjustments. The accumulator complies with the directives 200/66/EC and 2013/56/EU, which define requirements for rechargeable batteries and their environmental compatibility.
Applications
This replacement accumulator is exclusively intended for the RED emergency light Follow me® 5W. It serves as a replacement for the accumulator built into the device to ensure the functionality of the emergency light in an emergency. The emergency light itself is used in rooms where safe and reliable lighting is required during a power failure, such as corridors, stairwells, office buildings, or production halls. The accumulator ensures that the LED light maintains at least the required minimum operating duration even during a power failure.
Functions and Equipment in Detail
The accumulator consists of nickel-metal hydride cells with a nominal voltage of 4.8 V (1.2 V per cell). The capacity is at least 600 mAh at a temperature of 20 °C. These specifications ensure sufficient energy supply for the emergency light to meet the required operating time in an emergency. The weight of the accumulator is approximately 55 g, with each individual cell weighing about 13 g. The design allows the accumulator to be easily inserted into and removed from the device without requiring tools.
Technology Explained Simply
Nickel-metal hydride cells (NiMH) are a proven technology for rechargeable accumulators, particularly used in emergency lights due to their high cycle stability and good performance at moderate temperatures. The nominal voltage of 4.8 V results from the combination of four cells, each providing 1.2 V. A capacity of 600 mAh means the accumulator can theoretically supply power for one hour at a discharge current of 600 mA – in practice, the actual operating time is influenced by the LED’s power consumption and other factors. The term “high-temperature-resistant” indicates that the accumulator operates stably even at elevated ambient temperatures, which is relevant for use in industrial or technical rooms.
Compatibility and Accessories
The replacement accumulator is specifically designed for the RED emergency light Follow me® 5W and fits mechanically and electrically into the device. It is not suitable for other models or manufacturers. Compatibility is ensured by the plug contacts, which enable a direct connection to the charging regulator and LED lighting. The note “Available under DEHA No.: 5257037” refers to an alternative ordering designation used in certain specialist markets or by distributors. There are no additional accessories or components specifically intended for this accumulator.
Installation and Mounting
Installation is performed by simply inserting the accumulator into the designated plug contacts inside the emergency light. No tools or additional mounting aids are required. The plug & play function enables quick and error-free maintenance, allowing the operational readiness of the emergency light to be restored rapidly. Installation should be carried out by a qualified person to ensure safety and functionality.
Operational Advantages
Using the replacement accumulator extends the service life of the emergency light, as the accumulator can be replaced individually after reaching its service life, without needing to replace the entire device. The rechargeable technology ensures sustainable use, and compliance with the specified directives guarantees environmentally compatible disposal. The simple handling and high reliability of the accumulator contribute to reducing maintenance time and costs.