RED 5610-10-0002, EAN: 4046725398813

RED 5610-10-0002 Walk Me LED Emergency Light 3W

RED 5610-10-0002 Walk Me LED Emergency Light 3W

Lieske Part No. 2022757
Mfg Part No 5610-10-0002
EAN-Code 4046725398813
Manufacturer RED
Here only 170,94 EUR
203,42 EUR incl. VAT

Further information for RED 5610-10-0002 Walk Me LED Emergency Light 3W

General
Operating voltage220-240 V AC
Frequency50/60 Hz
System performance3 W
Luminous flux220 or 130 lm
Emergency light duration3 or 8 h
LED light colour6500 K
Operation modeStandby circuit, single battery
Self-testAutomatic and manual
Status indicatorVia two status LEDs
Lens optics360° wide, 360° narrow, directional wide, directional narrow
Switching thresholdunder 166 V
Battery voltage3,65 V
Battery capacity3,2 Ah
Initial charging time20 Hours
Degree of protectionIP40 surface mount/IP20 flush mount
The LED emergency light WALK ME® by RED is an emergency lighting unit for escape routes that automatically switches to emergency lighting mode in the event of a mains power failure. It is powered by an integrated lithium-ion battery, providing an emergency lighting duration of either 3 hours at 220 lumens or 8 hours at 130 lumens. The light is designed for standby operation and is suitable for both recessed and surface mounting. For surface mounting, a surface-mount ring trim is included, supporting optical integration into the surrounding environment.

Applications

The emergency light WALK ME® is designed for use in buildings where reliable emergency lighting for escape routes is required. It is suitable for office buildings, administrative buildings, production halls, and other areas where orientation assistance for people is necessary in the event of a power failure. Depending on the mounting method, the light can be used in various environments, with protection rating IP40 for surface mounting and IP20 for recessed applications.

Functions and Equipment in Detail

The light features automatic and manual self-test functions to regularly check the system's functionality. The status is indicated by two status LEDs, visually signaling the operating state. The light colour temperature is 6500 K, corresponding to a cool, neutral white, ensuring good visibility. The system power consumption is 3 W, ensuring energy-efficient lighting.

Technology Explained Simply

The integrated lithium-ion battery has a nominal voltage of 3.65 V and a capacity of 3.2 Ah. The initial charging time is 20 hours, which should be considered for new installations or after prolonged storage. The switching threshold is below 166 V, with the transition to emergency lighting mode occurring within 0.3 seconds, ensuring a rapid response to voltage failures. The light offers four different lens optics to adjust the beam angle: 360° wide, 360° narrow, directional wide, and directional narrow. This allows the lighting to be optimized according to room geometry and requirements.

Compatibility and Accessories

The accessories include a replacement battery with designation 5610-10-0005, specifically developed for the LED WALK ME® EMERGENCY LIGHT. This battery is a direct replacement for the integrated lithium-ion battery and allows for maintenance or replacement without replacing the entire light. Compatibility is ensured by identical electrical specifications (3.65 V, 3.2 Ah).

Mounting and Installation

The light can be mounted either surface-mounted or recessed. For surface mounting, a surface-mount ring trim is included in the delivery scope, enabling clean optical integration into walls or ceilings. Mounting hardware is also included and comprises the necessary fastening elements. Installation is carried out at an operating voltage of 220–240 V AC at 50/60 Hz.

Operational Advantages

The WALK ME® LED emergency light provides reliable and low-maintenance emergency lighting. The integrated self-test functions ensure the device is regularly checked for functionality. The choice between two emergency lighting durations (3 h / 220 lm or 8 h / 130 lm) allows adaptation to different requirements. The four lens optics enable flexible adjustment of light distribution, making the light suitable for both large rooms and narrow corridors. The protection rating IP40 (surface) and IP20 (recessed) ensures sufficient protection against dust and splashing water for surface installations, while recessed installations require a lower protection level.

Delivery Contents

The LED emergency light is delivered with battery, light housing, surface-mount ring trim, four lens optics, and mounting hardware. These components are intended for direct installation and include all necessary parts for mounting and commissioning.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2022757
qrcode für RED 5610-10-0002 Walk Me LED Emergency Light 3W