| General |
| Voltage | 3x230 V/400 V AC |
| Frequency | 50/60 Hz |
| Nominal current | 10 A |
| Limit current | 100 A |
| Starting current | 0,4 % lb |
| Startup time | 10 s |
| Own consumption | <2 W/10 V |
| Voltage range | 80-120 % Un |
| AC voltage withstand | 4 kV |
| Impulse voltage withstand | 6 kV |
| Overcurrent resistor | 30 Imax for 0.01 s |
| Max. conductor cross section | 25 mm² |
| Interface | S0 1000 Imp/kWh |
| Indication | 7-segment LCD |
| Daily counter function | freely resettable |
| Instant consumption display | in watts for import and export |
| Mounting method | DIN rail (top hat rail) 4 TE |
The digital three-phase meter 3Ph72-2R-100A from RED is a measuring device for direct mounting on the DIN rail (4 TE) and is used for precise measurement of active power in three-phase AC networks. It is designed for use in installations with direct connection and measures flowing currents in the range of 10 A (rated current) to 100 A (limit current). The device features a 7-segment LCD display that clearly and legibly shows the measured values. The metering is performed in both directions – for supply and delivery – making it particularly suitable for applications with feed-in, for example from photovoltaic systems.
Applications
The meter is designed for use in industrial and commercial electrical installations as well as in private households with self-consumption and feed-in. It is especially suitable for installations where separate recording of import and export consumption is required, such as in solar systems or under electricity contracts with two-directional metering. The daily metering function, which can be reset freely, enables detailed consumption analysis over 24 hours. The real-time display of current consumption in watts for import and export provides up-to-the-minute information on current power flow.
Functions and Equipment in Detail
The device features an S0 interface with an impulse rate of 1000 imp/kWh, which can be used to connect to external metering systems or energy management systems. The impulse frequency enables precise transmission of meter readings. The display of current consumption in watts for both directions (import and export) supports monitoring of the energy balance. The daily metering function is resettable, so the meter reading can be reset daily, which is useful for billing or analysis of daily consumption.
Technology Explained Simply
The meter operates at a voltage of 3x230 V/400 V AC at a frequency of 50/60 Hz. The starting current is 0.4 % of the rated current, with a starting time of 10 seconds. The device's own consumption is less than 2 W at 10 V, indicating low network load. The voltage range is 80–120 % of the rated voltage, ensuring stable operation even with voltage fluctuations. The AC voltage withstand is 4 kV for one minute and the impulse voltage withstand is 6 kV (1.2 µs), protecting the device against transient overvoltages. The overload resistance is 30 times the maximum current for 0.01 seconds, providing high safety during short-term current peaks. The terminals are designed for a maximum conductor cross-section of 25 mm², enabling flexible cabling.
Compatibility and Accessories
The meter is designed for direct connection to the power supply and does not require additional transformers. As suitable accessories, the DSZ15D-3x80A MID three-phase meter 3x80 A calibrated (article number 28380015) is offered, which is also suitable for use in three-phase networks. Combination with other devices for energy monitoring is possible, especially via the S0 interface.
Mounting and Installation
Mounting is done on the DIN rail (4 TE), enabling quick and secure installation in enclosures. The terminals are designed for a conductor cross-section up to 25 mm², allowing a wide range of cable types to be used. The direct connection method requires no additional current transformers, simplifying installation.
Advantages in Operation
The meter provides precise and reliable measurement of active power in both directions. The daily metering function and the real-time consumption display support energy monitoring and optimization. The S0 interface enables integration into existing energy management systems. The robust construction with high overvoltage protection values ensures long service life and safe operational reliability even under difficult conditions.