Description
The monitor control panel MU-307 A is used for acoustic and visual monitoring of the amplifier, but also for pre-transfer.
, the system is in a stable 19? case (2U) installed and both the ELA-operation (100 V lines appropriate) as well as the low use. A high-quality full-range speaker and headphone output facilitate the ongoing monitoring.
, the control speaker and the headphone output has a separate volume control, line volume is adjusted via front-mounted dial, the display is one of the multi-colored LED strings.
Features

The monitoring of up to 10 programs is possible, the selection is done through multi-stage switch, each line has a 5-fold LED level display.
, the volume of the monitoring loudspeaker or headphones can be adjusted continuously by means of a controller.
Each of the 10 monitoring inputs can on the front of the device with a special knob to the required input voltage - set (1 100 V).
Power is supplied via mains voltage (230 V AC) and on DC voltage (24 V DC), eg in case of power failure (emergency power supply) .
Technical data MU 307 A
Loudspeaker Full range chassis, 2 W with volume control
. Headphone output max: 1.0 W min: 8 ohms, with volume control.
input voltage 1 V - 100 V (continuously variable)
AUX input 0 dB, 10 kohms, balanced
monitor 10 channels, can be switched separately
Power consumption max. 12 W
Power supply AC 120 V, 220 V, 230 V, 240 V (50 - 60 Hz) DC: 24V
Frequency response better than -3 dB (100 Hz - 20 kHz)
Dimensions (W x H x D) 483 x 88 x 200, (19? 2 RU)
Weight approx. 4.7 kg