| General |
| Nominal power | 15 W |
| Secondary impedance | 4 - 8 Ohm |
| Connection type | Solder lugs |
| Core dimension | 48 x 20 mm |
| Mounting hole spacing | 60 mm |
| Transmission range | 50 - 18000 Hz |
The 100 V matching transformer MT-150S from RCS Audio-Systems is a component for power matching in sound systems, particularly in 100-volt networks. It is used to match the output power of an amplifier to the impedance of a loudspeaker, ensuring efficient and loss-free signal transmission. With a rated power of 15 watts, it is suitable for small to medium loudspeaker applications, such as in offices, waiting areas, or small event rooms.
Applications
The transformer is used in professional sound systems where multiple loudspeakers are supplied via a common 100-volt network. It enables power matching to the respective loudspeaker impedance, ensuring uniform sound level and optimal signal transmission. The application is typically in indoor environments where stable and noise-free signal transmission is required.
Functions and Features in Detail
The MT-150S offers power matching in the primary circuit (100 V) with multiple steps: 15 W, 7.5 W, 3.9 W, and 1.8 W. These steps allow flexible adaptation to different loudspeaker requirements. The secondary side is designed for impedances of 4 to 8 ohms, ensuring compatibility with a wide range of loudspeakers. The connection type is via solder lugs, enabling a secure and reliable electrical connection. The low height and compact design with dimensions of 42 mm height, 70 mm width, and 42 mm depth ensure minimal space requirement, which is advantageous in tight installation conditions.
Technology Explained Simply
A matching transformer like the MT-150S transforms the high voltage of a 100-volt network into a lower voltage suitable for loudspeaker operation. The power is adjusted according to the loudspeaker's impedance. The primary side (100 V) is designed for network connection, while the secondary side (4–8 ohms) is directly connected to the loudspeaker. The core dimensions of 48 mm x 20 mm and weight of 340 g indicate a robust yet compact construction. The frequency response range of 50 to 18000 Hz covers the entire audible frequency range, ensuring clear and undistorted reproduction.
Compatibility and Accessories
The transformer is designed for loudspeakers with an impedance of 4 to 8 ohms and can be used in 100-volt networks. It is compatible with standard amplifiers and loudspeakers designed for 100-volt systems. The mounting hole spacing of 60 mm allows for easy installation on standard brackets or in loudspeaker enclosures.
Installation and Mounting
Mounting is done via the specified mounting hole spacing of 60 mm, with solder lugs used for the electrical connection. Installation requires basic electrical and mounting knowledge to ensure correct connection between the 100-volt network and the loudspeaker. The solder lug connection type requires a soldering station or soldering iron for connection.
Operational Advantages
The MT-150S features high efficiency, resulting in efficient energy conversion and low power losses. The low height and compact design allow flexible placement, even in limited installation conditions. The multi-step power matching provides flexibility in adapting to different loudspeaker requirements, achieving optimal sound level and audio quality. The frequency response range of 50 to 18000 Hz ensures clear and detailed reproduction of the audio signal.