| General |
| Nominal power | 10 W |
| Power adjustment primary 100V | 10 - 5 - 2,5 W |
| Secondary impedance | 8 Ohm |
| Connection type | Colour-coded open wire ends |
| Core dimension | 41 x 14 mm |
| Mounting hole spacing | 51 mm |
| Transmission range | 50 - 18000 Hz |
The
100 V matching transformer from manufacturer RCS Audio-Systems, type MT-101L, is a component for power matching in sound systems. It is used to connect a 100-volt amplifier to a speaker with a nominal impedance of 8 ohms. The matching is achieved via a primary voltage level of 100 V and allows selection of different power levels to optimize speaker volume and spacing within the system.
Applications
The transformer is designed for use in professional and semi-professional sound systems, particularly in buildings with central amplification, such as schools, offices, shopping centres or public facilities. It enables adjustment of speaker power to match specific requirements, achieving even sound distribution over large areas. Use in 100-volt systems is common, as these offer high efficiency for power transmission over long distances.
Functions and Equipment in Detail
The
100 V matching transformer provides a nominal power of 10 watts. Primary power matching is available in three stages: 10 W, 5 W, and 2.5 W, with selection made via terminal connectors. The secondary side is designed for an impedance of 8 ohms, which is the standard impedance for many speakers. Connection is made via
colour-coded open wire ends, enabling simple and secure connections. The colour coding simplifies cable assignment and reduces installation errors.
Technology Explained Simply
The transformer operates in the frequency range of 50 to 18,000 Hz, covering the entire audible range and ensuring clear, distortion-free reproduction. The core size of 41 x 14 mm and compact design with dimensions 36 mm (height) x 62 mm (width) x 33 mm (depth) ensure
low space requirement, which is advantageous when integrating into existing systems. The mounting hole spacing is 51 mm, enabling standard installation.
Compatibility and Accessories
The transformer is compatible with 100-volt amplifiers and speakers with 8-ohm impedance. It can be used in existing sound systems to optimize power matching for new or additional speakers.
Mounting and Installation
Mounting is done via the designated mounting holes with a spacing of 51 mm. The open wire ends allow direct connection to corresponding cables. Installation does not require special tools, but proper cable connection is necessary to ensure stable power transmission.
Advantages in Operation
The
100 V matching transformer features
high efficiency, resulting in efficient energy conversion and low heat generation. Its low height and compact design facilitate integration into existing systems. The three-stage power adjustment allows flexible use depending on speaker position and desired volume. Use in 100-volt systems reduces power losses during transmission over long cable runs.