Description
The preamplifier module ME-2A program allows the supply or Upgrade from 1 to 2, the ME 4 A from 1 to 4, the recorded music next door modules depicted. The onset of the individual modules is very simple, all necessary connectors and plugs are installed in the device or on the back side.
Features

The ME-2A has 2 separate balanced. XLR outputs (module 1 and 2) and 1 master output. The volume control is done by the controller of each module.
4 The ME-A has 4 separate balanced. XLR outputs (Module 1, 2, 3 and 4) and 1 master output. The volume control is done by the controller of each module.
Power is supplied via AC power 230 V AC, but also by 24 V DC direct current (emergency power supply).
Devices can than 19? unit, but can also be used as a desktop unit. The necessary 19?-Mount brackets are attached to the equipment and are easy to remove.
, the module preamplifier can be connected directly to any mixing amplifier, but also at each stage.
, the sound source modules listed below are available and can be used in the preamplifier module
Technical data ME-2 A
maximum output impedance. 0.775 V (0 dBu), 600 ohms, unbalanced on XLR
Frequency response less than (-0.5 dB) 20 - 20,000 Hz
Signal-to-noise ratio better than 68 dB
Power supply 230 V AC (50/-60 Hz), 24 V DC
Power consumption approx. 25 W
Dimensions (W x H x D) (2 RU) 483 x 88 x 350
Weight approx. 5.0 kg