| General |
| Nominal capacity | 15 W |
| Base impedance | 8 Ohm |
| 100V power taps | 15 / 10 / 5 / 3 W |
| Sound pressure (1W / 1m) | 105 dB |
| Max. sound pressure (SPL Pmax/1m) | 117 dB |
| Frequency range (±10 dB) | 300 – 6.000 Hz |
| Degree of protection | IP66 |
| Material and colour | Plastic, grey (paintable) |
| Connection | 2-pole hose cable with PG connector (waterproof) |
| Mounting | Swivel mounting bracket (wall, ceiling, mast) |
The DH-115 S from RCS Audio-Systems is a
pressure chamber loudspeaker for demanding sound reinforcement applications in industrial environments,
outdoor areas, or safety-critical installations. The device features a robust construction and a functional design with an oval sound horn, enabling both technical and visual integration into various architectural settings. The housing is made of impact- and scratch-resistant plastic in medium industrial grey, allowing it to blend visually into different environments. Repainting is easily possible to meet specific architectural requirements.
Applications
The loudspeaker is designed for use in harsh environments, particularly where high mechanical and climatic resistance is required. Typical applications include production halls, warehouses, transportation facilities, public buildings, or security systems, where clear voice and signal reproduction is necessary even in high ambient noise. The protection rating
IP66 according to DIN 40050 ensures high protection against dust and water, including splashing water and short-term immersion, making it suitable for outdoor use or damp indoor areas.
Functions and Equipment in Detail
The DH-115 S has a rated power handling of 15 W and a nominal impedance of 8 Ohm. For integration into 100V amplifier systems, a 6-step impedance selector switch is provided on the rear of the device, allowing selection between power taps of 15, 10, 5, and 3 W. Adjustment is simple using a screwdriver. The 2-pole connection cable is introduced into the housing via a PG cable gland, ensuring a watertight electrical connection protected against moisture.
Technology Explained Simply
The loudspeaker produces a sound pressure level of 105 dB at 1 W power and a distance of 1 meter. The maximum sound pressure level reaches 117 dB at a frequency of 1130 Hz, enabling clear voice reproduction even in noisy environments. The frequency range is between 300 Hz and 6,000 Hz (±10 dB), sufficient for clear reproduction of speech and signals, although not suitable for detailed music reproduction. The pressure chamber design ensures efficient sound radiation and good speech intelligibility.
Compatibility and Accessories
The DH-115 S is designed for use in 100V amplifier systems, commonly used in industrial and public sound reinforcement. Adaptation to different power levels is achieved via the integrated impedance selector switch.
Mounting and Installation
Installation is performed using a fully rotatable mounting bracket, enabling flexible attachment to walls, ceilings, or poles. Mounting requires no special tools, except a screwdriver for adjusting the impedance selector switch. Dimensions are 180 mm (height) × 225 mm (width) × 230 mm (length), with a weight of approximately 1.5 kg.
Operational Advantages
The loudspeaker offers high mechanical and climatic robustness, making it suitable for demanding environments. Simple adaptation to 100V systems and the watertight cable gland reduce maintenance requirements. Clear voice reproduction and high sound pressure output ensure reliable signal transmission, even in noisy environments. The repaintable surface allows individual adaptation to the respective architecture.