| Technical data |
| Dimensions (W x H x D) | 119 x 65 x 60 mm |
| Frequency range | 15 -30.000 Hz |
| Output impedance | 200 Ohm |
| Input impedance | 20 kOhm |
The ATT-100 from RCS Audio-Systems is a 5-way 100V line level tap, specifically developed for use with 100V central units of the VLA and VLZ series. It serves to convert the high-voltage signal (100V) from the amplifier into a low-level line signal, suitable for cascading output lines 1 to 5. This function enables the direct control of additional amplifiers or end devices that cannot process a 100V signal, directly from the central unit. The unit is mounted on the rear side of the central unit and can be directly attached to the rear wall of the housing, ensuring a compact and space-efficient installation.
Applications
The ATT-100 is designed for applications in sound distribution systems where flexible signal distribution is required. It is typically used in buildings with multiple amplifier units, such as office buildings, hotels, or residential complexes, where different zones or floors are supplied via separate amplifiers. Cascading the output lines allows signals from one central unit to be transmitted to multiple downstream amplifiers without requiring additional signal amplifiers or converters.
Functions and Equipment in Detail
The device converts the 100V signal into a line signal, with an output impedance of 200 Ohm and an input impedance of 20 kOhm. These values ensure stable signal transmission without distortion or signal loss. Frequency transmission occurs in the range of 15 Hz to 30,000 Hz, covering a broad bandwidth for music, speech, and alarm functions. Direct mounting on the rear wall of the central unit reduces necessary cabling and minimizes the number of required connection points.
Technology Explained Simply
The conversion of the 100V signal into a line signal is achieved through an integrated transformer and electronic circuitry that reduces the signal to a level suitable for standard amplifiers. Output lines 1 to 5 are each independently available, allowing them to be connected to different end devices. Cascading means that the signal can be transmitted from one central unit via the ATT-100 to a second amplifier, which in turn can supply additional speakers or zones. This is particularly useful in large installations where centralized control of multiple amplifiers is required.
Compatibility and Accessories
The ATT-100 is specifically designed for use with 100V central units of the VLA and VLZ series from RCS Audio-Systems. It is compatible with models such as the VLA-240C or the VLZ-6600A. Direct mounting on the rear side of these central units enables an integrated installation without additional space requirements.
Mounting and Installation
Mounting is done directly onto the rear wall of the 100V central unit. The unit is designed to be attached to the rear side without additional fastening materials or tools. Dimensions are 119 mm (width) × 65 mm (height) × 60 mm (depth), fitting well within the standard dimensions of the central units. Net weight is 0.5 kg.
Operational Advantages
Cascading the output lines increases the flexibility of the sound distribution system. It is possible to control multiple amplifiers from a single central unit, simplifying installation and maintenance. Direct mounting on the central unit reduces the number of required cable connections and minimizes the risk of signal interference. The frequency range of 15 Hz to 30,000 Hz ensures clear and distortion-free signal transmission, regardless of the type of content being transmitted.
Frequency Range: 15 Hz to 30,000 Hz, covering music, speech, and alarm functions.
Dimensions: 119 mm (W) × 65 mm (H) × 60 mm (D).
Weight: 0.5 kg.
Mounting: Directly on the rear wall of the 100V central unit.