Cable protection pipe seal for pipe inner diameters of 45-60 mm. System with sealing sleeve and sealing star. Flexible plastic laminate bag coated on both sides with strips of sealing compound. Waterproof sealing of power cables in plastic pipes, metal pipes and cement pipes as well as in core drillings. Patented gel valve prevents pressure losses and ensures permanent tightness of the system. Easy to disassemble. A round, smooth-walled inner surface is required. When used in installation pipes, a pressure load of at least 3 bar must be ensured. The watertightness was tested under an applied pressure of 0.3 bar when the cables were subjected to vibration, bending, torsion, tension and shear. The chemical and bacterial resistance was also tested. Based on VDE 0278 Part 1, load change tests were carried out with conductor temperatures of up to 90 °C. An average service life of 30 years was determined by measuring and calculating the diffusion rate. The sealing behaviour after 30 years was simulated and confirmed by leak tests with reduced internal pressure.