Further information for RaidSonic IB-168SK-B HDD carrier 3.5"
Features
Size (imperial)
13.3 cm (5.25")
Type
Carrier panel
Product colour
Black
Number of HDDs supported
1
HDD size
3.5"
HDD interface
SATA, SATA II, SATA III
Material
Plastic, Stainless steel
Data transfer rate
6 Gbit/s
Hot-swap
Key lock
Logistics data
Products per master (outer) case
20 pc(s)
Master (outer) case width
386 mm
Master (outer) case length
329 mm
Master (outer) case height
477 mm
Master (outer) case gross weight
9.6 kg
Harmonized System (HS) code
84733080
Country of origin
China
Packaging content
Quantity per pack
1 pc(s)
Manual
Packaging data
Package width
175 mm
Package depth
218 mm
Package height
60 mm
Package weight
415 g
System requirements
Mac compatibility
Mac operating systems supported
Windows operating systems supported
Linux operating systems supported
Weight & dimensions
Width
184 mm
Depth
42 mm
Height
149 mm
Weight
300 g
The RaidSonic IB-168SK-B is a hot-swap tray for 8,9 cm ( 3,5 inch ) hard drives, designed to be installed in a standard 13,3 cm ( 5,2 inch ) drive bay of a computer. It enables the exchange of SATA hard drives without tools and without shutting down the system, provided the SATA controller supports hot-swap functionality. The device is designed as a carrierless hot-swap tray, allowing the hard drive to be directly inserted and secured into the tray without additional mounting brackets or fasteners for the drive itself. The construction from plastic and stainless steel ensures a stable yet lightweight design, which integrates well into existing systems.
Applications
The IB-168SK-B is suitable for use in desktop PCs and servers where flexible and rapid hard drive replacement is required. It is mounted in a 13,3 cm ( 5,2 inch ) drive bay, making it compatible with standard PC cases and many server configurations. The hot-swap feature allows for drive replacement during operation, which is particularly advantageous in environments requiring high availability, such as backup systems or NAS solutions. The SATA III interface supports a maximum data transfer rate of 6 Gbit/s and is backward compatible with SATA I and II.
Functions and Features in Detail
The hot-swap tray features a keyed lock with an integrated lock, controlling access to the hard drive and protecting against unauthorized removal. The hard drive is inserted into the tray via a spring-loaded door (spring lock), and secured by pushing the door to its final position, which mechanically locks it in place. Correct installation orientation is important, as the hard drive must be inserted with the labeled side facing up to ensure the door closes properly. The device is designed for a 8,9 cm ( 3,5 inch ) hard drive installed in a 13,3 cm ( 5,2 inch ) bay. The maximum number of supported hard drives is one per tray.
Technical Explanation
The IB-168SK-B uses an NSS connector (Non-Scratch SATA), designed for high durability and enabling up to 50,000 drive swaps without wear. This is particularly important, as frequent swapping could otherwise quickly degrade contact surfaces. Power supply is provided via a 15-pin SATA power connector, connected to the power supply unit. Data transmission occurs through a 7-pin SATA data connector, connected to the system’s SATA controller. The use of stainless steel and plastic ensures efficient heat dissipation, keeping the hard drive adequately cooled without requiring an additional fan. An internal rubber cushion reduces noise and protects the hard drive from mechanical vibrations.
Compatibility and Accessories
The hot-swap tray is compatible with SATA I, II, and III hard drives and supports data transfer rates up to 6 Gbit/s. It is suitable for operating systems such as Windows, macOS, and Linux. Installation is performed using four screws included in the delivery. The tray is mounted in the 13,3 cm ( 5,2 inch ) bay, followed by connecting the power and data cables at the rear of the tray. The user manual is also included in the delivery.
Installation and Mounting
Installation involves securing the tray in the 13,3 cm ( 5,2 inch ) bay using the four screws included in the delivery. Subsequently, the 15-pin SATA power cable and the 7-pin SATA data cable are connected at the rear of the tray. The hard drive is inserted into the tray with the labeled side facing up, the spring-loaded door is closed, and the lock is secured with the key. For replacement, the lock is unlocked with the key, the spring-loaded door is opened, and the hard drive is automatically ejected from the tray. The hard drive should not be forced closed, as this may cause damage.
Operational Advantages
The IB-168SK-B offers fast and tool-free hard drive replacement, reducing maintenance time. The hot-swap feature enables replacement during operation, if supported by the SATA controller. The integrated keyed lock enhances security by preventing unauthorized access to the hard drive. The material combination of stainless steel and plastic ensures good heat dissipation and noise reduction, contributing to quiet operation. The NSS interface ensures a long service life of the connector, which is particularly beneficial for frequent drive swaps.