Application: Submersible motor cables are intended for permanent use in drinking water for connecting electrical equipment, e.g. submersible pump motors. They can also be used in service water. They are suitable for medium mechanical stress, for use in dry, damp and wet rooms as well as outdoors. The cables are chlorine-resistant (31 °C, 1.0 mg/L). Construction Conductor: Bare copper strand, fine-wire class 5 Core insulation: EPR in accordance with VDE 0507 T. 20 Core identification: VDE 0293-308 Outer sheath: EPR in accordance with VDE 0507 T. 21 Sheath colour: blue Note G = with protective conductor green-yellow X = without protective conductor Technical data: Nominal voltage: 600/1000 V (with protected installation) Test voltage: 2500 V Temperature range: -25 °C - +80 °C (moving) -40 °C - +80 °C (fixed installation) Max. permissible tensile stress 15 N per mm#81# Conductor cross-section