Application: Submersible motor cables are intended for permanent use in drinking water for connecting electrical equipment, e.g. submersible pump motors. They can also be used in service water. They are suitable for medium mechanical stress, for use in dry, damp and wet rooms and outdoors. The cables are chlorine-resistant (31 °C, 1.0 mg/L). Structure: Conductor: bare fine-wire copper wire, class 5. Core insulation: EPR based on VDE 0507 T. 20. Core identification: VDE 0293-308. Outer sheath: EPR based on VDE 0507 T. 21. Sheath color: blue. Note: G = with green-yellow protective conductor, X = without protective conductor. Technical data: Nominal voltage: 600/1000 V (with protected installation). Test voltage: 2500 V. Temperature range: -25 °C - +80 °C (moving), -40 °C - +80 °C (fixed). Max. permissible tensile stress: 15 N per sq. mm conductor cross-section.