Primo P419, EAN: 4260182061046

Primo P419 wall and ceiling elbow 30° M20/M25

Primo P419 wall and ceiling elbow 30° M20/M25

Lieske Part No. 679700
Mfg Part No P419
EAN-Code 4260182061046
Manufacturer Primo
Here only 124,06 EUR
147,63 EUR incl. VAT

Further information for Primo P419 wall and ceiling elbow 30° M20/M25

General
Angle30 °
Pipe sizesM20/M25
MountingStress-relieved, concrete-tight
Accessoriesavailable with wings and front panel
The Primo P419 is a wall and ceiling elbow with an angle of 30°, specifically developed for guiding M20 and M25 conduit pipes in concrete structures. It ensures secure and concrete-tight continuation of the pipes while providing a tension-relieved fixation to avoid stresses in the concrete. The design enables an optimal bending radius, facilitating the installation of conduit pipes in confined spaces or complex routing. The elbow is designed for use in concrete components, with end transitions executed as wall or ceiling elbows. Due to its compact shape, it can be easily integrated into closely spaced steel reinforcement grids.

Applications

The P419 is used in electrical and building technology where conduit pipes must be routed through concrete components. It is suitable for use in precast concrete plants as well as for the repair or new construction of concrete structures. Applications occur in both high-rise construction and industrial facilities where secure and durable pipe installation is required. The concrete-tight fixation ensures that no cracks in the concrete are caused by tensile forces.

Functions and Equipment in Detail

The elbow allows the continuation of M20 and M25 pipes, with the pipes fixed in the concrete via tension-relieved mounting. The 30° angled design provides a sufficiently wide bending radius, facilitating the pulling of cables, especially over long distances. The end transitions are designed to provide clean cut edges on the pipes, eliminating the need for cutting. This reduces labor effort and improves the quality of installation.

Technology Explained Simply

The tension-relieved fixation means the pipes are not subjected to tensile stress in the concrete, protecting the integrity of the concrete. The concrete-tight connection is achieved through the special shape of the elbow, which closely conforms to the pipes and enables a tight bond with the surrounding concrete. The 30° angled construction represents a compromise between a relatively gentle bending radius and a compact design that saves space in confined areas. The use of M20 and M25 pipes is standard in electrical installations, with M25 intended for larger cable cross-sections or higher mechanical loads.

Compatibility and Accessories

The P419 is available with wings and front part, enabling fixation to the steel reinforcement. This variant is particularly suitable for use in precast concrete plants, where the elbow is directly glued into the concrete or attached to the reinforcement. The combination with wings and front part expands application possibilities and enables secure mounting without additional tools. Compatibility with M20 and M25 pipes is standard, and no further specific accessories are mentioned.

Installation and Mounting

Installation is carried out by embedding into the concrete structure, where the elbow is either directly attached to the steel reinforcement or glued in precast plants. The wings and front part facilitate positioning and secure the fixation. Pipes are inserted into the elbow and fixed, ensuring a concrete-tight connection. Cutting of the pipes is not required, as the end transitions provide clean cut edges. Installation takes place before concreting, and positioning within the component should be carefully planned to ensure optimal cable routing.

Operational Advantages

Using the Primo P419 reduces labor effort during pipe installation, as cutting of pipes is unnecessary. The tension-relieved fixation protects the concrete from cracking, increasing the long-term stability of the structure. The concrete-tight connection ensures durable and secure fixation, even under load. The 30° angled design enables flexible routing, even in confined spaces, and facilitates cable pulling. The use of wings and front part expands mounting options and adapts to different construction site conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/679700
qrcode für Primo P419 wall and ceiling elbow 30° M20/M25