Primo P001, EAN: 4260182060063

Primo P001 Cable Carrier with Adhesive Disc

Installation > Install Outlets and Accessories > For brick / hollow wall / concrete installation boxes

Primo P001 Cable Carrier with Adhesive Disc

Lieske Part No. 679532
Mfg Part No P001
EAN-Code 4260182060063
Manufacturer Primo
Here only 1,76 EUR
2,09 EUR incl. VAT

Further information for Primo P001 Cable Carrier with Adhesive Disc

General
MountingAdhesive disc
Centering functionPin as centre drill hole
AccessoriesDrilling template P102 (recommended for multiple drilling)
The cable carrier P001 from Primo is an aid for precise marking and installation of recessed boxes in double-leaf drywall constructions. It enables exact transfer of the position of an already installed box to the opposite wall, eliminating the need for a second measurement after the wall is completed. The cable carrier is attached to the first gypsum board wall and features a tapered pin that drills through insulation and the second wall, making the exact position visible.

Applications

The cable carrier is specifically designed for use in double-leaf drywall constructions, where a box is installed on one wall and its position must be precisely transferred to the opposite wall. It is particularly suitable for installing recessed boxes in hollow walls, where precise alignment is necessary to ensure correct routing of electrical cables. The application is performed before plastering or cladding the second wall, to make the marking visible before final completion.

Functions and Equipment in Detail

The cable carrier has a length of 13.5 cm and is attached to the first wall using an adhesive disc. The integrated tapered pin penetrates the insulation and the second drywall, making the exact position of the box visible on the opposite side. This enables precise alignment without additional measurements. The pin also serves as a centering drill hole, allowing the box to be drilled directly without prior exploratory drilling. This reduces labor and error risk during drilling.

Technology Explained Simply

The function of the cable carrier is based on mechanically transferring the position of an already mounted box to the opposite wall. The adhesive disc ensures secure attachment to the first wall, while the pin pierces through the intermediate layer (e.g., insulation) and the second wall. The visible marking on the second wall allows for exact alignment of the drilling. The centering function of the pin reduces the need for additional drilling attempts and minimizes the risk of mis-drilling.

Compatibility and Accessories

The cable carrier is designed for use with recessed boxes in drywall walls. For multiple drilling operations, the use of a drilling template is recommended to increase work speed and ensure simultaneous positioning of multiple boxes. The drilling template P102 is available as a suitable accessory and supports uniform placement of multiple boxes in a row.

Installation and Mounting

Installation is performed by attaching the cable carrier to the first gypsum board wall at the location where the box is to be installed. The pin is then pushed through the insulation and the second wall, marking the position on the opposite side. Subsequently, drilling can be carried out directly at the marked point, with the pin serving as a centering aid. After drilling, the cable carrier is removed, and the box can be inserted into the drilled hole.

Operational Advantages

Using the cable carrier P001 reduces the time required for positioning boxes in double-leaf walls, as no additional measurements or exploratory drilling are needed. The precise marking minimizes errors and ensures a clean, uniform installation. Using the drilling template P102 for multiple drilling operations further increases efficiency and enables quick, uniform placement of multiple boxes.

Note: Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/679532
qrcode für Primo P001 Cable Carrier with Adhesive Disc