The product is a cable from Poly, type CABL, manufacturer's number 85Q81AA, specifically developed as a USB-A Bluetooth adapter for use with the BT600 headset. It serves as an interface between the headset and a computer or any other USB-enabled device to establish a wireless connection via Bluetooth. The cable is black and enables the use of the BT600 headset in environments where no integrated Bluetooth functionality is available, for example, with older computers or specialized workstations.
Applications
The adapter is primarily intended for use in office and corporate environments where stable and reliable communication via headsets is required. It is used in conjunction with the BT600 headset, which is designed for Unified Communications (UC) and VoIP applications. Using the adapter extends the headset's compatibility to devices that feature a USB Type-A port but lack native Bluetooth support. This is particularly relevant in older or specialized work environments where integrating modern communication devices is necessary.
Features and Equipment in Detail
The cable features a USB Type-A connector, which is standard on most computers and workstations. It enables wireless connection of the BT600 headset via Bluetooth, with the Bluetooth functionality provided by the adapter. The connection operates in the frequency range between 2.402 and 2.480 MHz, with an average output power of less than 2.4 mW. This complies with the requirements of European standard EN 300 328 V2.2.2 for radio devices in the 2.4 GHz band. The Bluetooth connection is designed for indoor use and enables stable communication over short distances.
Technology Explained Simply
The adapter acts as a bridge between the USB port of a computer and the Bluetooth module of the BT600 headset. It converts the USB signal into a Bluetooth signal, allowing the headset to communicate wirelessly with the device. The connection is established using Bluetooth technology, which is designed for short ranges and low power consumption. The maximum output power of less than 2.4 mW is sufficient to maintain a stable connection within a typical office environment without consuming unnecessary energy. The frequency band of 2.402 to 2.480 MHz is a standard for Bluetooth devices and ensures compatibility with a wide range of end devices.
Compatibility and Accessories
The adapter is specifically designed for use with the BT600 headset. It enables wireless use of the headset on devices that have a USB Type-A port but no integrated Bluetooth functionality. Compatibility is limited to the BT600 headset; other headsets or devices are not explicitly supported.
Installation and Mounting
Installation is performed by simply inserting the USB Type-A end into an available USB port on the computer or workstation. The other end of the cable is connected to the BT600 headset, with the exact connection method depending on the headset's design. The connection is established automatically once the device is powered on and Bluetooth mode is activated. No additional drivers or software are required, as the device is recognized as a standard Bluetooth adapter.
Operational Advantages
The adapter enables the use of the BT600 headset in environments where no native Bluetooth support is available, without requiring additional hardware or software. The connection is stable and reliable, which is important for professional communication scenarios. The low output power ensures low energy consumption, which can extend the lifespan of the devices. The simple installation and direct connection to the USB port make the adapter a practical solution for integrating Bluetooth headsets into existing systems.