| General |
| Terminal points | 15 |
| Plug terminals (max. rigid) | 2,5 mm² |
| Plug terminals (max. flexible with ferrule) | 1,5 mm² |
| Plug terminals (max. rigid, larger version) | 4 mm² |
| Plug terminals (max. flexible with ferrule, larger version) | 2,5 mm² |
| Screw frame terminal (max. rigid) | 25 mm² |
| Screw frame terminal (max. flexible) | 16 mm² |
| Nominal current | 80 A |
| Recommended tightening torque (screw frame terminal) | 3 Nm |
| Recommended tightening torque (plug-in terminals) | 1,5 Nm |
| Mounting method | snap mounting on DIN rail |
| Finger protection | according to VBG4 / BGV A2 |
| Standards | EN 60998 / VDE 0613 |
The Pollmann neutral conductor terminal block type 2020251 is a plug-in terminal for use in electrical distributions and switchgear. It is designed for the safe and orderly connection of neutral conductors (N) in electrical installations and is designed in accordance with standards EN 60998 and VDE 0613. The terminal is designed for mounting on DIN mounting rails and offers 15 terminal positions, most of which are plug-in terminals. The construction allows for quick and secure installation without tools, as it is secured by snap mounting. The dimensions correspond to the automat housing dimensions with a depth less than 30 mm, enabling compact placement in distributors and enclosures. Mounting behind a terminal cover is also possible, which facilitates integration into existing installations.
Plug-in neutral conductor terminal with 15 terminal positions offers flexible connection options for various conductor cross-sections. The terminal features 12 plug-in terminals designed for max. 2.5 mm² solid or 1.5 mm² stranded with wire end ferrule. Two additional plug-in terminals are designed for max. 4 mm² solid or 2.5 mm² stranded with wire end ferrule. One screw frame terminal enables connection of conductors up to 25 mm² solid or 16 mm² stranded. The terminals are
finger-safe in accordance with VBG4 / BGV A2, ensuring safe operation and maintenance, particularly in areas with increased accident risk.
Functions and equipment in detail include the use of plug-in terminals for quick and secure connection of conductors. The plug-in terminals are designed for connecting single- and multi-strand conductors, with stranded conductors requiring wire end ferrules. The screw frame terminal provides a robust connection for larger cross-sections and is suitable for use in installations with higher current loads. The terminal is designed for a rated current load of 80 A, making it suitable for typical distribution tasks in residential and commercial buildings.
Technology explained simply shows that the terminal is mounted on DIN mounting rails, enabling a standardized and universally applicable mounting. The snap mounting allows for easy and tool-free installation. The dimensions correspond to the automat housing dimensions with a depth under 30 mm, enabling compact placement in distributors. Mounting behind a terminal cover is possible, which facilitates integration into existing installations. The terminals are finger-safe in accordance with VBG4 / BGV A2, meaning they are constructed to prevent unintended contact with conductive parts by fingers or tools.
Compatibility and accessories refers to use in electrical distributions, particularly in meter enclosures and distributors. The terminal is designed for connecting neutral conductors and can be used in combination with other plug-in terminals, such as PE or branch terminals. The use of wire end ferrules for stranded conductors is required to ensure a secure and durable connection. The terminal is not intended for use in explosive hazard areas, as no corresponding approvals are mentioned.
Mounting and installation is done by snap mounting onto DIN mounting rails, with no additional tools required. The terminal is designed for a depth less than 30 mm, enabling placement in standardized distributors. Mounting behind a terminal cover is possible, which facilitates integration into existing installations. The terminals are designed for connecting single- and multi-strand conductors, with stranded conductors requiring wire end ferrules. The recommended tightening torque for the screw frame terminal is 3 Nm, while 1.5 Nm is recommended for the plug-in terminals.
Advantages in operation lie in the quick and tool-free mounting, compact design, and secure connection of conductors. The terminal is designed for a rated current load of 80 A, ensuring reliable performance in typical distribution installations. The finger-safe design in accordance with VBG4 / BGV A2 increases safety during maintenance and inspection. The use of plug-in terminals enables flexible and quick adaptation of the installation, especially during modifications or expansions.