| General |
| Power supply type | Primary pulsed - |
| Input | Single phase - |
| Output voltage | 12 V DC |
| Output current | 2,5 A |
| Output power | 30 W |
| Connection type | Screw connection - |
| Mounting method | DIN rail mounting - |
The UNO-PS/1AC/12DC/ 30W power supply from Phoenix Contact is a primary-switched unit of the UNO POWER series, designed for mounting on support rails. It is used to convert alternating voltage into a constant direct voltage and is specifically designed for use in industrial applications where a reliable and compact power supply is required. The device features screw terminals and is designed for operation with a single-phase AC power supply. The output delivers a direct voltage of 12 V DC with a maximum current of 2.5 A, corresponding to a power of 30 W.
Applications
This power supply is suitable for use in control and automation technology, particularly in environments where a stable and continuous power supply for electronic components is required. Typical application areas include powering sensors, relays, communication modules, or small control devices in industrial plants. The support rail mounting enables quick and secure installation in enclosures, making it widely used in industrial electrical engineering.
Functions and Equipment in Detail
The primary-switched circuit ensures high efficiency and low heat generation, extending the device's service life. The screw terminals at input and output provide a secure and mechanically stable connection that remains reliable even under vibration or mechanical stress. The power supply is designed for operation with a single-phase AC power supply, with exact voltage values specified in the technical data. The output voltage of 12 V DC is constant and suitable for powering electronic assemblies.
Technology Explained Simply
The primary-switched technology means that the incoming AC voltage is converted into a pulsating DC voltage on the primary side of the power supply. This enables a more compact design and higher efficiency compared to linear power supplies. The 12 V DC output voltage is stabilized by a control loop, ensuring a constant supply even with fluctuations in input voltage or load changes. The support rail mounting is achieved via an integrated DIN rail connector, enabling quick and secure installation in the enclosure.
Compatibility and Accessories
Additional components can be used to extend functionality and improve reliability. The redundancy module UNO-DIODE/5-24DC/2X10/1X20 (part number 2905489) allows parallel connection of multiple power supplies to achieve redundant power supply. Surge protection devices of type 3, such as the PLT-SEC-T3-24-FM-UT (part number 2907916) or PLT-SEC-T3-230-FM-UT (part number 2907919), can be installed on-site to protect the device and connected loads from transient overvoltages. These accessories are specifically designed for use with Phoenix Contact products and ensure safe and compatible integration.
Mounting and Installation
Mounting is done via the integrated DIN rail, which is attached to the support rail in the enclosure. The screw terminals at input and output are designed for cable connections, with exact cross-sections specified in the technical data. Installation requires no additional tools, and the screw connections are secure and durable. The power supply is designed for use in enclosed enclosures, with sufficient ventilation required for heat dissipation.
Advantages in Operation
The primary-switched technology offers high efficiency and low power loss, resulting in a longer service life and reduced heat generation. The support rail mounting enables quick and secure installation, reducing mounting time in the enclosure. The constant 12 V DC output voltage ensures reliable power supply for electronic assemblies, even under fluctuating loads. The use of screw terminals ensures a mechanically stable connection that remains reliable under industrial conditions.