| General |
| Power supply type | Primary pulsed |
| Input voltage | Single phase |
| Output voltage | 24 V DC |
| Output current | 2,5 A |
| Output power | 60 W |
| Connection type | Screw connection |
| Mounting method | DIN rail mounting |
The UNO-PS/1AC/24DC/ 60W power supply from Phoenix Contact is a primary-switched unit designed for use in automation technology. It is intended for converting alternating voltage into a constant direct voltage and is designed for mounting on support rails. The device features screw terminals and delivers an output voltage of 24 V DC with a current of 2.5 A, corresponding to a power output of 60 W. The power supply is designed for use in industrial installations where reliable and stable power supply for controls, sensors and other electronic components is required.
Applications
The UNO-PS/1AC/24DC/ 60W is suitable for use in industrial environments, particularly in automation technology, where continuous and secure power supply is required for control devices, PLC systems, display and communication modules. Due to its support rail mounting, it is particularly well-suited for integration into enclosures, where space and standardization are important. The power supply is designed for operation with single-phase alternating current, making it suitable for use in many industrial and commercial installations.
Functions and Equipment in Detail
The power supply operates with primary switching, enabling high efficiency and performance. The output voltage of 24 V DC is stable and suitable for powering numerous electronic components. The device features screw terminals, ensuring a secure and mechanically robust connection. Mounting is done via support rails, enabling quick and standardized installation in enclosures. The output power of 60 W (24 V DC / 2.5 A) is sufficient to supply multiple smaller loads simultaneously.
Technology Explained Simply
The primary-switched technology means that the input voltage is converted into a pulsating current in the input section of the device before the voltage is transformed and smoothed to the desired value. This results in higher efficiency and lower losses compared to linear power supplies. The screw terminals provide a secure mechanical connection that remains stable even under vibration or mechanical stress. Support rail mounting enables quick and standardized installation in enclosures, reducing installation time.
Compatibility and Accessories
To extend functionality and improve safety, various accessories can be combined. These include the redundancy module UNO-DIODE/5-24DC/2X10/1X20 (article number 2905489), which enables redundant power supply, as well as surge protection devices such as the PLT-SEC-T3-230-FM-UT (article number 2907919) or PLT-SEC-T3-24-FM-UT (article number 2907916), which protect against transient voltage spikes. Electronic device protection switches such as the CBMC E4 24DC/1-4A NO (article number 2906031) or CBMC E4 24DC/1-10A NO (article number 2906032) can be used to protect the power supply and connected loads.
Mounting and Installation
Mounting is done via support rails, typically executed according to DIN standard. The screw terminals allow for a secure and mechanically stable connection. The power supply is designed for use in enclosures, and installation in a closed, well-ventilated enclosure is recommended to ensure adequate cooling. Adherence to specified clearances and mounting instructions is important to ensure safe and reliable operation.
Operational Advantages
The primary-switched technology ensures high efficiency and low losses, resulting in efficient energy conversion. The stable output voltage of 24 V DC ensures reliable power supply for electronic components. Support rail mounting and screw terminals simplify installation and maintenance. The combination with accessories such as redundancy modules or surge protection devices increases the safety and reliability of the overall system.