Osram 4050300024417, EAN: 4050300024417

Osram NAV-T 250W SUPER 4Y E40 FLH1 sodium vapor high-pressure lamp

Illuminants > Discharge lamps > Miscellaneous

Osram NAV-T 250W SUPER 4Y E40 FLH1 sodium vapor high-pressure lamp

Lieske Part No. 601401
Mfg Part No 4050300024417
EAN-Code 4050300024417
Manufacturer Osram
Here only 676,93 EUR
805,55 EUR incl. VAT

Further information for Osram NAV-T 250W SUPER 4Y E40 FLH1 sodium vapor high-pressure lamp

General
Lamp survival rate95 %
Lamp maintenance factor80 %
Service life4 years
Daily operating time11 h
Nominal power250 W
Luminous efficacyHigh
Compatibilityconventional and electronic ballasts
Energy efficiencyup to 50 % energy saving compared to HQL
Application areasRoads, outdoor lighting, industrial facilities
Luminaire compatibilityopen and closed luminaires
Safety instructionsDisconnect mains power before installation, do not operate with defective outer piston, protect from splashing water
DimmableYes
The Osram NAV-T 250W SUPER 4Y E40 FLH1 is a sodium vapour high-pressure lamp designed for use in open and enclosed luminaires. It is intended for illuminating streets, outdoor areas, and industrial facilities, and is characterised by high luminous efficacy and long service life. The lamp is suitable for operation with conventional and electronic ballasts and can be dimmed, enabling flexible adjustment of light intensity. Particularly advantageous is its energy efficiency, which is optimised when operated with an EVG POWERTRONIC® PTo 3DIM ballast. Compared to mercury vapour lamps (HQL), up to 50 % energy savings can be achieved when replacing them.

Applications

The lamp is primarily intended for outdoor lighting, especially for streets and industrial facilities. It can be used in both open and enclosed luminaires. For outdoor applications, however, a suitable luminaire is required that meets the necessary protection requirements to protect the lamp from splashing water. Therefore, outdoor use requires an appropriate luminaire construction that provides the necessary protective measures.

Functions and Equipment in Detail

The NAV-T 250W SUPER 4Y E40 FLH1 offers a lamp survival rate of 95 % at a burning time of 16,000 hours. The lamp maintenance factor is 80 % at the same burning time, according to DIN 13201. This means that light output remains stable over the lamp’s lifetime, reducing maintenance costs. The useful life, i.e. the maintenance cycle, is 4 years with a daily operating time of approximately 11 hours. The lamp is dimmable, enabling light intensity to be adjusted according to specific requirements.

Technology Explained Simply

The lamp operates with sodium vapour under high pressure, enabling high luminous efficacy and long service life. The light colour is typical for sodium vapour lamps, i.e. yellow-orange, and is particularly suitable for applications where high light intensity and energy efficiency are prioritised. The operating voltage is supplied via the ballast, and the lamp can be operated with both conventional and electronic ballasts. The dimmability allows for flexible use, especially in combination with electronic ballasts.

Compatibility and Accessories

The lamp is compatible with conventional and electronic ballasts. Operation with an EVG POWERTRONIC® PTo 3DIM ballast is particularly efficient, as it optimises energy efficiency. The lamp is suitable for open and enclosed luminaires, but for outdoor applications, a suitable luminaire is required to protect against splashing water.

Installation and Mounting

Before installation, the mains power must be switched off to ensure safe mounting. The lamp must not be operated with a defective outer bulb, as this could lead to an increased safety risk. Mounting is carried out in suitable luminaires that meet the requirements of the respective application environment. The lamp is intended for outdoor use, but requires a luminaire that protects against splashing water.

Operational Advantages

The lamp offers high luminous efficacy and stable light output over its entire service life. The long service life of 16,000 hours with a survival rate of 95 % reduces maintenance costs. The dimmability enables flexible use, and the energy efficiency leads to reduced energy consumption, especially compared to mercury vapour lamps. Use in industrial facilities and street lighting is particularly advantageous, as the lamp is robust and reliable.

Compatibility

The lamp is compatible with conventional and electronic ballasts. Operation with an EVG POWERTRONIC® PTo 3DIM ballast is particularly efficient. The lamp is suitable for open and enclosed luminaires, but for outdoor applications, a suitable luminaire is required to protect against splashing water.

Installation and Mounting

Before installation, the mains power must be switched off to ensure safe mounting. The lamp must not be operated with a defective outer bulb, as this could lead to an increased safety risk. Mounting is carried out in suitable luminaires that meet the requirements of the respective application environment. The lamp is intended for outdoor use, but requires a luminaire that protects against splashing water.

Operational Advantages

The lamp offers high luminous efficacy and stable light output over its entire service life. The long service life of 16,000 hours with a survival rate of 95 % reduces maintenance costs. The dimmability enables flexible use, and the energy efficiency leads to reduced energy consumption, especially compared to mercury vapour lamps. Use in industrial facilities and street lighting is particularly advantageous, as the lamp is robust and reliable.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/601401
qrcode für Osram NAV-T 250W SUPER 4Y E40 FLH1 sodium vapor high-pressure lamp